Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
(xxx@xxx.xxx) [ : Enter the setting mode] [ : Move from digit to digit] [ to : Enter the string] [Accept: ] PRECAUTIONS • Browser authentication and Password are factory-set to Off and no string, respectively. You should set them as soon as possible. • If you have forgotten your password, set it again using the menu on the main unit. 40 ¦ Computer settings Refer to instruction manuals of your computer or wireless the following settings. • Select Ad hoc (for some PC cards, this is Peer-to-Peer Group). • Set the Channel to channel assigned to the projector reset mode, this is set to 10). For some computers, you cannot set the channel in Ad hoc • Set SSID (for some types of PC card, use Network name instead) as the same as projector’s SSID (at factory shipment, this is set to TDPJ). • If Encryption and Key are set on the projector, set to the same values. Note: It is imperative that the projector and computer encryption settings are the same. If the settings are different, the encryption may be invalid when sending in the Ad hoc communication mode, so be careful. 41 Operations Projecting This projector can PC card to display them on the screen. This allows you to give presentations without create an advertising screen board using the slideshow function, and more. (The projector cannot effects such as those produced Microsoft ® PowerPoint ® .) ¦ Memory PC cards . PC card slot types The PC card slot installed on this projector TYPE II (PCMCIA Release 2.1)-compliant. Please use memory PC cards and conversion adapters compliant with this type card slot. Only a 3.3-V PC card can be used. (A 5-V ) . Supported storage media types This projector supports the following types of ATA-compliant storage media. This owner’s manual refers to the combination of the ATA conversion adapter and media in use as a “memory PC card. ” Storage media that can be used as-is Flash ATA card, TOSHIBA Mobile Disk Storage media that can be used in combination with each of the ATA conversion adapter types SmartMedia™, CompactFlash card, SD memory card, miniSD card, MMC, memory stick, xD-Picture Card™ Note that inserting conversion adapters and memory cards with different functions than above, and other memory cards (excluding the supplied wireless LAN PC card) into the projector could damage the PC card or cause malfunctions. . Memory PC Cards Whose Operation Have Been Confirmed Please note that presence on this list is not a guarantee of operation. •TOSHIBA Mobile Disk: PAMHD005 (5GB), PAMHD002 (2GB) • SmartMedia™: TOSHIBA PDR-SM32 (32MB), PDR-SM64 (64MB) • SD memory cards: TOSHIBA SD-M512 (512MB), SD-M256 (256MB), SD-M128 (128MB) • miniSD cards: TOSHIBA SD-S64 (64MB), SD-S32 (32MB) Adapters: BUFFALO MCR-5A, RXD-A The TOSHIBA IPC5019A SmartMedia™ PC card adapter is not ATA-compliant, and so cannot be used by this projector. . Backing up data Toshiba recommend that you back up the data on the memory PC card before use. (Toshiba assume no liability for losses incurred by data lost through the use of this projector. ) 42 ¦ JPEG files (1) Supported file extensions are jpg, (2) The maximum number including both and files is 512. (3) Some JPEG files are not by this projector. The limitations in (3) above can be alleviated by converting the JPEG file with the supplied JPEG Conversion Tool p.55 software application. ¦ Setting slideshow options Slideshow is the function to display the JPEG image files stored in a memory PC card one after another at fixed time intervals. When switching from one image to the next, Slideshow can add various display effects (transitions) to them. If you select Slide Show in step 2 in “ Projector settings” p.36 , the following items can be set. Item Description PC card display Manual Auto. (Select whether to automatically switch to wireless/card input when a PC card in plugged.) Auto. demo On Off (Select whether to automatically start a slide show when a PC card in plugged.) Interval Select the slide show display interval from among the following options using : 5 sec./10 sec./30 sec./1 min./3 min./5 min./10 min. Display effect Select the type of transition for slide shows from among the following options using : None / Wipe / Wipe / Wipe / Wipe / Dissolve / Cover / Cover / Cover / Cover / Checker / Zoom / Rotate zoom / Belt wipe / Blind Play icon Standard Continuous . Details on individual items • [PC card display] function • If you set PC card display to Auto. , the projector switches to wireless/card input mode automatically when a PC card is plugged into the PC card slot. Although this item is provided as one of slideshow options, the setting works the same way even when a wireless LAN PC card is plugged into the PC card slot. • If you set PC card display to Manual, the projector makes no response to the plugging of a PC card into the PC card slot. • [Auto. demo] function • If you set Auto. demo to On, the projector starts a slide show automatically when it switches to the wireless/card input mode with a memory PC ca...
Эта инструкция также подходит к моделям:Проекторы - TDP-TW90AU (6.46 mb)