Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Only LED lighting switch and flicker switcher (50/60Hz) can be operated. (2) When the ON/STANDBY LED turns steady orange, the TLPC001 document camera is now in standby mode. You may now press the ON/STANDBY button to start the operation. (3) When the ON/STANDBY LED turns steady green, you may now see the signal from the TLPC001 document camera on the screen. The CAMERA LED is now on. To view the signal from the computer, press INPUT button. (4) When the ON/STANDBY button is pressed for the second time, TLPC001 document camera switches to standby mode and the ON/STANDBY LED turns steady orange. You will no longer see the TLPC001 document camera signal on the screen. 4. Adjust the camera Turn on the LED light and then position the TLPC001 camera head by adjusting the gooseneck and arm in any angle. 20 5. Adjust the focus Rotate the focus wheel on the TLPC001 camera head to get a clear image. 6. Fine tune the image (1) Switch the suitable flicker setting at rear panel of TLPC001 document camera. (2) Lock the white balance. Although the camera is constantly adjusting the color balance of the captured image, the color balance may be disrupted, depending on the color layout of the document. If this happens, the white balance can be locked using the procedures below. • Place a piece of white paper under the camera and adjust the paper till it fills the whole screen. • Press WHITE BALANCE button to lock and keep the white balance setting. 7. Switching the video source_ Each time the INPUT button is pressed, it toggles the video source between camera and computer mode. Note : • Do not look directly at the LED light while the light is on. The strong light may cause damage to your eyes or sight. • Make sure the TLPC001 document camera is placed on a flat stable surface while setting up or pressing any buttons. Technical Specifications Image Pick-up Sensor 1/2” 3M pixel Color CMOS Sensor Effective Pixels QXGA (2048 H x 1536 V) Display Resolution XGA (1024 Hx 768 V) Optics Lens Fixed Focal Lens Focal Length fl=9.6mm Distortion <=2% Iris F=3.0, Shooting Area A4 Size at 432mm height I/O port Output D-sub 15pin VGA) CMOS Camera Signal Signal from Computer in port Computer In D-sub 15pin (VGA) Output Video Format XGA at 75Hz ( Camera Mode) Video Output Level RGB: 0.7 V(p-p)/ 75 ohm Lighting Light type Built-in LED light Electronic Functions Gain ±16; 33 levels Zoom 4x Zoom-in (10% at a time) Sensor mapping 2x Digital Zoom 2x White Balance Auto/Lock Exposure Manual Flicker Control 50/60 Hz switch Power (6.5mm Power Jack) Power Source AC 100V-240V, 50/60 Hz Power Supply 15V DC Power Adapter Consumption 5.5 Watts (LED light off); 7Watts (LED light on) Temperature Operating 0°C to 40°C (32°F to 104°F) Storage -30°C to 60°C (-22°F to 140°F) Dimension Folded 340mm x 270mm x 80mm Weight Main Unit : 1.9 kg (about 4.2 lb) Remote Control : 100g (with batteries) 22 TOSHIBA BENUTZERHANDBUCH DOKUMENTKAMERA für TOSHIBA Datenprojektor TLPC001 Andere Sprachversionen des Benutzerhandbuchs finden Sie auf der beigelegten CD-ROM. Inhalt SICHERHEITSVORKERHUNGEN......................................1 WICHTIGE SICHERHEITSHINWEISE................................2 WICHTIGE VORKERHUNGEN...........................................7 HAFTUNGSAUSSCHLÜSSE..............................................8 WEITERE HINWEISE UND INFORMATIONEN..................8 BATTERIEN FÜR DIE FERNBEDIENUNG.........................9 WICHTIGE ERKLÄRUNGEN..............................................9 Lieferumfang.....................................................................11 TLPC001 Teile..................................................................12 Bedientafel und Fernbedienung........................................13 erwenden der Zoomfunktion..........................................14 LED-Anzeige.....................................................................15 Rücktafel...........................................................................15 Verbindung........................................................................18 Wichtig...........................................................................18 Anschließen eines Toshiba-Projektors..........................18 Anschließen eines Computers.......................................18 Anschließen des Stromadapters....................................19 Installieren der LED-Lichtkappe.....................................19 Anpassen derTLPCOOl....................................................20 Kamerakopf...................................................................20 Schwanenhals und Arm.................................................20 Fokusrad........................................................................21 LED-Licht.......................................................................21 Replacing the remote control battery.................................22 Lithium-Batterie.....
Эта инструкция также подходит к моделям:Проекторы - TLP-C001U (3.76 mb)