Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Problem Cause and Required Action Refer to: I can establish a wireless • On the projector, press the [INPUT] key and make sure “To perform wireless LAN connection between that “Wireless” is selected as the input source. projection” (page 11) the projector and computer, but the • If computer display contents won’t project while “Wireless” is selected as the input source, click the“Starting and Stopping Projection from a Computer computer screen contents won’t project from the projector. button on the computer’s Wireless Connection 3 window. • If the projection image has been frozen or cut off by pressing the [FREEZE] or [BLANK] key on the projector, press the [ESC] key to cancel the freeze/ blank operation. Connected via Wireless LAN Connection” (page 26) User’s Guide (UsersGuide_English.pdf) Projection image • Check what is selected for the projector’s “Projection “To select display speed switching is slow. Setting” item. If “High-resolution” is selected, change the setting to “High-speed”. • If your computer is running Windows Vista or Windows 7, disable Windows AeroTM. priority or resolution priority for projection” (page 28) The user name does not appear when I start projecting from a computer. • Make sure that “On” is selected for the “Show User Name Display” item of the Wireless setup. “To switch between Default SSIDs” (page 30) How can I check the projector’s SSID and login code? • Check the Wireless standby screen. “To perform wireless projection” (page 11) 41 Simultaneous Wireless LAN Connections with Multiple Projectors Problem Cause and Required Action Refer to: Wireless Connection 3 is • Make sure all of the projectors are turned on. A – running on my computer, projector can be recognized by a computer even if but the Projector List “Wireless” is not selected as the projector’s input dialog box won’t display. source. • Make sure that all of the projectors have wireless adapters installed (page 39). • If the projectors and computer are far away from each other or if there is wall or some other physical impediment between them, move them closer and/or remove the impediment. • If a nearby microwave oven, Bluetooth device, or other device is interfering with the wireless LAN signal, relocate the interfering device. The SSID of the projector • Check the “SSID Broadcast” setting of the projector. If “To configure projector I want to connect to is “Disable” is selected, change the setting to “Enable”. network settings and not included on the wireless LAN connection Projector List dialog box. • If the projector is off, turn it on. settings” (page 34) Even though entering the • If there are two or three projectors, make sure that “To change the default login code displayed on each one has a different SSID: casiolpj_default1, SSID of a projector” the Wireless standby casiolpj_default2, casiolpj_default3. (page 16) screen, I get a “Could not connect to projector. Connection has been terminated.” error. • If there are more than three projectors, assign each one a unique SSID. In this case you can use the default SSIDs for three of the projectors and configure security settings for the remainder of the projectors to assign original SSIDs. “To configure security settings” (page 21) 42 System Admin Page Problem Cause and Required Action Refer to: The System Admin page The browser you are using may be configured to use a – does not appear when I proxy server. Since a proxy server configuration can try to access it from make it impossible to access the System Admin page, Wireless Connection 3. you should change your browser configuration. For information about proxy server settings, see the help and other user documentation for your browser. The System Admin front page does not appear when I specify the IP address of the projector in my web browser. • If the wireless LAN connection between the projector and computer is terminated, re-connect. • The browser you are using may be configured to use a proxy server. Disable the proxy server configuration. “Using a Default SSID to Connect a Computer to the Projector via Wireless LAN” (page 13), “Establishing a Wireless LAN Connection after Configuring Security Settings” (page 23) I forgot the login password I specified on the System Admin page. Perform the required operation on the projector to initialize the Wireless setup. Important! Initializing the Wireless setup returns all Wireless settings, including security settings and all other System Admin page settings, to their initial factory defaults. “To initialize the Wireless setup” (page 31) Performing Wireless Operations from a Computer Problem Cause and Required Action Refer to: I can’t change the SSID by using the projector’s Wireless setup menu. After you use the System Admin page to assign a new SSID to a projector, you no longer will be able to change the SSID using a projector remote controller key operation. To change the SSID, you will need to log in to the System Admin page again. “To configure projector ne...
Эта инструкция также подходит к моделям:Проекторы - XJ-A130V (7.11 mb)
Проекторы - A140V (7.11 mb)
Проекторы - A145V (7.11 mb)
Проекторы - A150V (7.11 mb)