Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
. 11 Wireless Connection 3 Wireless Connection 3 is control software for a computer that connects to the projector via wireless LAN connection. To start up Wireless Connection 3 Perform either of the following operations to start up Wireless Connection 3 on the computer. • Double-click the icon on your Windows desktop. • On your computer’s Windows Start menu, select [All Programs] - [CASIO] - [Wireless Connection 3]. Important! If your computer is running Windows Vista or Windows 7, starting up Wireless Connection 3 will cause the “User Account Control” message to appear. When it does, click [Allow]. Note Using the token wizard to install Wireless Connection 3 on USB memory makes it possible to start up Wireless Connection 3 by using the USB memory. For more information, see “Using the Token Wizard” (page 38). Wireless Connection 3 Windows The following shows the windows that appear while Wireless Connection 3 is running. Connection search Function menu button Minimize button Close button Login code Connection successful (connected) Projection control buttons Projection indicator Connection failed • The close, minimize, and function menu buttons are available on all three windows. 12 To display Wireless Connection 3 help On a Wireless Connection 3 window, click the function menu button and then click [Help] on the menu that appears. To display Wireless Connection 3 version information On a Wireless Connection 3 window, click the function menu button and then click [About] on the menu that appears. To close Wireless Connection 3 Perform either of the following operations. • On a Wireless Connection 3 window, click the function menu button and then click [Exit] on the menu that appears. • Click the close button in the upper right corner of a Wireless Connection 3 window. Using a Default SSID to Connect a Computer to the Projector via Wireless LAN This section explains how to use one of the three default SSIDs (casiolpj_default1, casiolpj_default2, casiolpj_default3) to establish a wireless LAN connection between the projector and a computer. Note • The initial default SSID for the projector is casiolpj_default1. • When using multiple projectors for simultaneous projection in the same area, each one must be assigned a different SSID for identification purposes. Since there are only three default SSIDs, you have up to three projectors with default SSIDs in the same area operating simultaneously. For more information, see “Wireless LAN Connection when Using Multiple Projectors at the Same Time” (page 16). Important! • Note that only computer screen contents can be sent from your computer to the projector over a wireless LAN connection. Audio data cannot be sent. • If you are running Wireless Connection 3 under Windows Vista or Windows 7, do not perform any of the operations that appear in the “User Account Control” message (such as software installation, new hardware connection, etc.) while there is a wireless connection between the computer and projector. 13 To use a default SSID to connect a computer to the projector via wireless LAN 1. Turn on the projector and wait until the POWER/STANDBY indicator is lit green. 2. Press the [INPUT] key and select “Wireless” as the input source. • This will project the Wireless standby screen. 3. Turn on your computer and start up Windows. 4. On the computer, start up Wireless Connection 3. • If your computer is running Windows Vista or Windows 7, starting up Wireless Connection 3 will cause the “User Account Control” message to appear. When it does, click [Allow]. • The Wireless Connection 3 window will appear with the message “Connecting”. • If your computer is running Windows Vista or Windows 7 and the “Set Network Location” dialog box appears, click [Cancel] to close the dialog box. • A dialog box like the one shown below as soon as Wireless Connection 3 finds a projector to connect to. 5. Enter the user name and login code. • The user name you enter here will be displayed as the user name on the projection screen. You can enter any name up to 20 characters long. • For the login code, enter the four-digit number displayed on the Wireless standby screen. 14 6. When everything is the way you want, click [OK]. • This establishes a wireless LAN connection between the projector and computer, and causes the computer screen contents to be projected from the projector. • The following shows the Wireless Connection 3 window that appears on the computer screen. This window is not shown on the image being projected by the projector. • Now if you want to configure security settings, refer to “Configuring Security Settings for a Wireless LAN Connection” (page 18). • For information about the Wireless Connection 3 procedure to simultaneously project images from multiple computers and to perform other operations, see “Wireless LAN Connection Operations” (page 25). 7. To close Wireless Connection 3, click the close button in the upper right corner of its window. • If the message “The pr...
Эта инструкция также подходит к моделям:Проекторы - XJ-A130 (5.99 mb)
Проекторы - A135 (5.99 mb)
Проекторы - A145 (5.99 mb)
Проекторы - A230 (5.99 mb)