Оценок - 5, средний балл: 4.2
(
)
)
|
Фото и характеристики Canon LV-7390 |
Фрагмент инструкции
POINT ^Ў<> buttons OK button Digital zoom - Select Digital zoom -. The On-Screen Menu disappears and D. zoom - appears. Press the OK button to compress image size. The projected image can be also compressed by pressing the D.ZOOM - or the OK button on the remote control unit. D.ZOOM + button D.ZOOM - button Keystone To exit the Digital zoom +/- mode, press any button except the D.ZOOM +/- buttons, OK and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see page 30) again, or adjust the screen size with the D.ZOOM +/- buttons. Keystone Ceiling This function is used to adjust keystone distortion of the projected image. Use the Point ^Ў buttons to choose the item you want to adjust. Keystone To correct keystone distortion, press the OK button. Keystone appears on the screen. Use the Point ^Ў buttons to correct keystone distortion (p.26). Store To store or reset the keystone correction, press the Point > button. Store.............. Keep the keystone correction even when the AC power cord is unplugged. Reset.............. Release the keystone correction when the AC power cord is unplugged. Rear .Note: • The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size. • True and Digital zoom +/– are disabled and cannot be displayed when 480i, 575i, 480p 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p.31). • Digital zoom +/- cannot be selected when True is selected. • The minimum compression ratio is limited at Normal screen size. • Natural wide cannot be selected when 720p, 1035i, 1080i or 1080p is selected on AV System Menu (p.43). • When the 16:9 function is selected on Screen aspect menu, 16:9 is not available in the PC and AV screen (pp.39, 49). • When the 4:3 function is selected on Screen aspect menu, Natural wide is not available in the AV screen (p.49). Ceiling When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen. Screen aspect This function is used to project the image to a 4:3 or 16:9 projection screen. Default (16:10) ....16:10 is the aspect of the LCD panel. The original Screen Menu is available. 16:9 ..... Set to a 16:9 projection screen. 4:3 ..... Set to a 4:3 projection screen. Reset To reset the adjusted data, select Reset and press the OK button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures. Input Source Selection (VIDEO, S-VIDEO) Direct Operation Choose VIDEO or S-VIDEO by pressing the VIDEO or the S-VIDEO button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. Remote control unit VIDEO button VIDEO S-VIDEO button S-VIDEO Menu Operation Press the MENU button to display the On- Screen Menu. Use the Point ^Ў buttons to select Input and then press the Point > or the OK button. 1 VIDEO 2 Use the Point ^Ў buttons to select VIDEO and then press the OK button. When video input signal is connected to the VIDEO jack, select VIDEO. VIDEO S-VIDEO Use the Point ^Ў buttons to select COMPUTER 1. And then press the Point > button to access the submenu items. Use the Point ^Ў buttons to select the S-VIDEO and then press the OK button. When the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/ COMPONENT IN terminal with a S- VIDEO-VGA cable, select S-VIDEO. S-VIDEO COMPUTER 1 Press the Point ^Ў buttons to select S-VIDEO. .Note: When the Auto input function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.52). VIDEO Input Input Source Selection (COMPONENT, SCART) Direct Operation Choose COMPUTER 1(COMPONENT) or COMPUTER 1 (SCART) by pressing the COMPONENT or the COMPUTER 1 button on the remote control unit. Before using these buttons, correct input source should be selected through Menu operation as described below. Remote control unit COMPUTER 1 button COMPUTER 1 (ANALOG PC) COMPUTER 1 (SCART) COMPONENT button COMPUTER 1 (COMPONENT) Input Menu Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point ^Ў buttons to select Input and then press the Point > or the OK button. 2 Use the Point ^Ў buttons to select COMPUTER 1 and then press the Point > button. Use the Point ^Ў buttons to select COMPONENT or SCART and then press the OK button. 3 When the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/COMPONENT IN terminal with a COMPONENT-VGA Cable, select COMPONENT. COMPONENT When the input source is coming from video equipment conne...
Эта инструкция также подходит к моделям:Проекторы - LV-7290 (5.53 mb)
Проекторы - LV-7295 (5.53 mb)
Проекторы - LV-8225 (5.53 mb)