|
Инструкция по эксплуатации Samsung, модель SP-M275
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Make sure to use an automatic connection DHCP ADSL modem. 2-17 Installation and Connection 2-17-2. Connecting to a Static IP Network You can attach the projector to a network that uses a Static IP address, which corresponds to using a dedicated lease line. If your network uses Static IP addresses, you must get the IP address, subnet mask, and gateway values from your Internet Service Provider (ISP), turn on the Network function in the projector's Menu, and then enter the values into the Network function manually. To connect to a Static IP address network, follow these steps : 1. Connect a LAN cable between the LAN port on the wall and a wired or wireless IP router. 2. Connect a LAN cable between the [LAN] port on the back of the projector and the wired or wireless IP router. 3. Turn on the projector, and then press the [MENU] button. 4. Select ^ ^ ^ . 5. Select and press the [O'] button. Use the -*/► buttons to navigate between each IP Address entry field and the a/t buttons to enter values. 6. When done entering all the values for IP Address, press the [O'] button and then repeat the steps for Subnet mask and Gateway. 7. When all values have been filled in, press the [MENU] or [RETURN] button to exit the setup menu. 0 • To use the network function, must be set to . • If you use a static IP, your ISP will inform you of your IP address, subnet mask and gateway. These values must be entered to complete your network setup. If you do not know your static IP address, consult your network administrator. • For instructions on the setup and connection of the router, refer to the router's user manual. • You can connect the LAN cable directly to the projector without using a router. • If you use an IP Router which supports the DHCP function, you can set the router to either DHCP or static IP. • For instructions on the use of a static IP, consult your Internet service provider. Installation and Connection 2-17 2-18 Kensington Lock slot The Kensington Lock slot allows you to lock your projector, providing a sense of security when you use it in a public place. Because the shape and usage of the lock may differ depending on the model and the manufacturer, see the User Manual supplied with the locking device for more information. Locking the product 1. Loop the Kensington lock cable around an immovable part of desk or heavy object as directed in the Kensington lock user manual. 2. Insert the locking part of the locking device into the Kensington lock hole in the projector. 3. Insert the Kensington lock key into the locking mechanism and turn it in the locking direction. E3 You can purchase a locking device from an electronics store or an online shop. 2-18 Installation and Connection 3 Using 3-1 Product Features 1. An optical engine adopting new LCD technology • 1024 x 768 resolution. • 3P-LCD panel. • SP-M205 : Provides a bright, 2000 ANSI lumen screen. • SP-M225 : Provides a bright, 2200 ANSI lumen screen. • SP-M255 : Provides a bright, 2500 ANSI lumen screen. • SP-M275 : Provides a bright, 2700 ANSI lumen screen. • SP-M305 : Provides a bright, 3000 ANSI lumen screen. 2. Minimized fan noise • Minimizes fan noise through optimized internal air flow and the fan installation structure. 3. Multiple input terminals • Increases the connectivity to peripheral devices such as D-Sub 15P, Video, HDMI(DVI PC signal, supported), etc. 4. Audio Output • Equipped with an internal 7W (mono) speaker. 5. User adjustments • Allows adjustment of each input port. • Equipped with an internal Test Pattern that can be used to install and adjust the projector. • Compact size, lightweight, and portable. 6. Convenient Network Function • The projector can be monitored and controlled from a PC using the network function. 7. Multimedia Function • You can enjoy video, photos, and music, and view documents stored on a USB device, without connecting to a PC. 8. Security Function • Security password can be set to prevent unauthorized adjustments and access to the projector. Using 3-1 3-2 Front, Upper ooo ICON NAME DESCRIPTION O Indicators - STAND BY (Blue LED) - LAMP (Blue LED) - STATUS (Green/Red/Yellow LED) □ Refer to the LED Indications. © Move av<> / Select O' Volume ^ button a v<> / Q1: Use to move or to select an item within a menu. V?_VSL : Use to adjust the volume. o MENU button Use to display the Menu Screen. o SOURCE button Use to select the external device signal. 0 (!) POWER button Use to turn the projector on or off. 0 Zoom Knob Use to enlarge or reduce image size. o Focus Ring Use for Focus Adjustment. 0 Lens 0 Remote Control Signal Receiver Hole for attaching lens cap string 3-2 Using 3-3 Remote Control S3 Using your projector with another remote control device nearby may result in improper functioning due to remote control code (frequency) interference. 0 POWER (0) Button Use this button to turn... Эта инструкция также подходит к моделям: Проекторы - SP-M205 (2.63 mb) Проекторы - SP-M225 (2.63 mb) Проекторы - SP-M255 (2.63 mb) Проекторы - SP-M305 (2.63 mb)
Напишите ваш отзыв об устройстве
|
|
)
