Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
1) Front-Floor : Normal Image 2) Front-Ceiling : Horizontal/Vertical Reversed Image 3) Rear-Floor : Horizontally Reversed Image 4) Rear-Ceiling : Vertically Reversed Image Lamp Mode Used to set the image brightness by adjusting the amount of light generated by the lamp. 1) Eco : Using this function, you can adjust the light level of the lamp so that you Eco can comfortably watch pictures on the screen even when watching under dark conditions. It also lowers power consumption and extends the life of the lamp. 2) Bright : Used to enhance the brightness in relatively bright ambient light. Since Bright this mode increases the light level of the lamp, you may experience more noise which is produced when the projector is cooled down. V-Keystone If video scences are distorted or tilted, you can compensate for this using the vertical Keystone function. Background When there is no signal from the broadcasting station or the external device connected to the projector, the screen is changed to blue or black. If a signal is received, the desktop background color disappears and a normal screen is displayed. 1) Blue 2) Black Test Pattern Generated by the projector itself. Utilized as standard to optimize the installation of the projector. 1) Crosshatch : You can check whether the picture is distorted or not. 2) Screen Size : You can refer to picture format sizes such as 1.33:1 or 1.78:1. 3) Red : Red Screen, only for color adjustment. 4) Green : Green Screen, only for color adjustment. 5) Blue : Blue Screen, only for color adjustment. 6) White : White Screen, only for color adjustment. 7) 6500K_White : White Screen, shows brightest white color possible. . The Red/Green/Blue colors of the test patterns are only for the color adjustment procedures, and may not comply with the actual colors displayed during video playback. Factory Default Using this function, you can reset various settings to the factory default settings. | Input | Picture | Setup | Option | * Click the Play( )/Stop( ) button in the table below to view the video file. Screen Adjustment Description Play/Stop Language You can select the Language used for the menu screen. Menu Option You can adjust the settings related to the menu screen. 1) Position : You can move the location of the menu to a new position (up/down/right/left). 2) Transparency : Selects the transparency of the menu screen. 1) Opaque 2) Low 3) Medium 4) High 3) Display Time : You can set the display time of the menu screen. 1) 5 sec 5) 90 sec 2) 10 sec 6) 120 sec 3) 30 sec 7) Stay On 4) 60 sec Position Translucency Display Time Auto Power On 1) On: When power is supplied, the product operates automatically. 2) Off: When power is supplied, the product enters Standby mode. To operate the product, you have to press the Power button on the remote control or key panel. Sleep Timer 1) Off : Operates continually until you turn the power off manually. 2) 10 min/20 min/30 min : When the configured time has passed, the projector turns to Standby mode. . This function only runs when the no signal state is maintained continuously. Information You can check external source signals, picture setup, PC picture adjustment and lamp use time. | Before Contacting Service Personnel | Symptoms Troubleshooting No Power. ..Check the power cable connections. I want to install my projector on the ceiling. ..The ceiling installation support is sold separately. Contact your local product distributor. External Source can not be selected. ..Be sure that the connection cable(s) (video) is properly connected to the proper port. If the device is not connected properly, it can not be selected. Symptoms Troubleshooting Remote control does not work. ..Check whether your remote control is at a right angle and at the correct distance. Remove any obstacles between your remote control and the product. ..Direct lighting of 3-way light bulbs or other lighting device on the remote sensor of the projector may affect the sensitivity and cause the remote control to malfunction. ..Check if the remote control battery is empty. ..Check whether the LED indicator on the top of the projector is turned on. I cannot select a menu. ..Check if the menu is displayed in gray. A gray-colored menu is unavailable. Troubleshooting • Be sure that the power cord of the projector is connected. • Be sure that the proper input source is selected. • Check that the connectors are properly connected to the ports at the back of the projector. • Check the Remote Control batteries. • Be sure that the
Проекторы - SP-D400 (1.42 mb)
Проекторы - SP-D400SG (1.42 mb)