Инструкция по эксплуатации Sony, модель VPL-DS100
Производитель: Sony
Размер: 861.44 kb
Название файла: 4101719111.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста
К этому устройству также есть другие инструкции:
Фрагмент инструкции
kensington. com/ Control Panel O I / 1 (on/standby) key Turns on the projector when the projector is in standby mode. The ON/ STANDBY indicator around the I / 1 key lights in green when the power is turned on. When turning off the power, press the I / 1 key twice following the message on the screen, or press and hold the key for about two seconds. For details on steps for turning off the power, see "To turn off the power” on page 27. 2 ON/STANDBY indicator (located around the I / 1 key) Lights up or flashes under the following conditions: - Lights in red when a AC power cord is plugged into a wall outlet. Once in standby mode, you can turn on the projector with the I / 1 key. - Lights in green when the power is turned on. - Flashes in green while the cooling fan runs after the power is turned off with the I / 1 key. The fan runs for about 90 seconds after the power is turned off. The ON/STANDBY indicator flashes quickly for the first 60 seconds. During this time, you cannot light up the ON/STANDBY indicator with the I / 1 key. For details on the LAMP/COVER and the TEMP/FAN indicators, see on page 44. Location and Function of Controls 11 Overview © INPUT key Selects the input signal. Each time you press the key, the input signal switches as follows: Input A —t Video —t S Video I_I © TILT adjustment key For details, see "How to use the powered tilt adjuster” on page 12. 5 MENU key Displays the on-screen menu. Press again to clear the menu. 6 ENTER key Enters the settings of items in the menu system. Q Arrow keys (A/V/) Select the menu or to make various adjustments. How to use the powered tilt adjuster To adjust the height Adjust the height of the projector as follows: 1 Press the I / 1 key The lens protector opens, and the powered tilt adjuster rises automatically. The adjuster stops at its previously adjusted position. 2 Press A or V of the TILT key to adjust the tilt of the projector. You may press the D KEYSTONE key on the Remote Commander to display the Tilt menu and adjust the tilt using the V/V/b/B keys. Notes • Be careful not to let the projector down on your fingers. • Do not push hard on the top of the projector with the powered tilt adjuster out. It may be occurred malfunction. 12 Location and Function of Controls Connector Panel O INPUT A connector (HD D-sub 15-pin, female) Connect to external equipment such as a computer. Connects to the monitor output on a computer using the supplied cable. When inputting a component or 15k RGB signal, use an optional cable. For details, see "To connect a 15kRGB/ Component equipment" on page 19. 2 Video input connector Connect to external video equipment such as a VCR. • VIDEO (phono type): Connects to the composite video output of video equipment. • S VIDEO (mini DIN 4-pin): Connects to the S video output (Y/C video output) of video equipment. © AUDIO (stereo minijack) connector When listening to sound output from the computer, connect to the audio output of the computer. When listening to sound output from the VCR, connect to the audio output of the VCR. Q AC IN socket Connects the supplied AC power cord. Location and Function of Controls 13 Overview Remote Commander e- N ©- ©- ©- ©- ©- FREEZE l/(!) --a, *cb- INPUT 1 MENU SfC* I - PUSH V BiTER -© -0 -© D KEYSTONE PZDOM V y O I / 1 (on/standby) key 2 ENTER/arrow key (V/V/b/B) Press the center of the key to use ENTER. © MENU key © D ZOOM +/- key Enlarges the image at a desired location on the screen. +: Pressing the + key once displays the icon. This icon indicates the point you want to enlarge. Use an arrow key (V/ V/b/B) to move the icon to the point to be enlarged. Press the + key repeatedly until the image is enlarged to your requirements. -: Pressing the - key reduces an image that has been enlarged with the D ZOOM + key. © Infrared transmitter 6 FREEZE key Used to freeze the picture projected. To cancel the freeze function, press the key again. 7 INPUT key © APA (Auto Pixel Alignment) key Adjusts a picture clearest automatically while a signal is input from a computer. Used when “Smart APA” in the SET SETTING menu is set to “Off.” Normally set to “On.” © D KEYSTONE key Used to adjust the tilt of the projector, or the trapezoidal distortion of the image manually. Each time you press this key, the Tilt menu and the V Keystone menu is displayed alternately. Use the arrow key (V/V/b/B) for the adjustment. © RESET key Resets the value of an item back to its factory preset value or returns the enlarged image back to its original size. This key functions when the menu or a setting item is displayed on the screen. Before using the Remote Commander Pull out the clear film from the lithium battery holder. To replace battery 1 Release the lock of the lithium battery holder by picking it, and pull out the holder from the Remote Commander. 14 Location and Function of Controls 2 Install the lithium battery. 3 Put the lithium b...
Эта инструкция также подходит к моделям:
- ()
)
