Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
58 Fitting the lens cap ........................... 58 Cleaning and the Screen of the Projector ........................................... 58 Specifications ................................... 59 Preset Signals ............................. 61 Input Signals and Adjustable/ Setting Items ................... 64 Ceiling Installation ........................... 66 When Using the PSS-H10 Projector Suspension Support ......... 66 When Using the PSS-610 Projector Suspension Support ......... 70 Index ............................................... 73 6 Precautions On safety • Check that the operating voltage of your unit is identical with the voltage of your local power supply. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further. • Unplug the unit from the wall outlet if it is not to be used for several days. • To disconnect the cord, pull it out by the plug. Never pull the cord itself. • The wall outlet should be near the unit and easily accessible. • The unit is not disconnected to the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • Do not look into the lens while the lamp is on. • Do not place your hand or objects near the ventilation holes. The air coming out is hot. On preventing internal heat buildup After you turn off the power with the ?/1 (On/standby) switch, do not disconnect the unit from the wall outlet while the cooling fan is still running. Caution The projector is equipped with ventilation holes (intake) and ventilation holes (exhaust). Do not block or place anything near these holes, or internal heat build-up may occur, causing picture degradation or damage to the projector. On repacking Save the original shipping carton and packing material; they will come in handy if you ever have to ship your unit. For maximum protection, repack your unit as it was originally packed at the factory. Checking the model name of the projector Check the model name of the projector first. The model name is located at the bottom of the projector (Example: VPL-AW15). You cannot use some of the functions or menu options for certain projector models. Location of Controls Front/Side You can use the buttons on the control panel with the same names as those on the remote control to operate the projector. INPUT button (1 page 27) MENU button (1 page 36) ?/1 (On/standby) switch (1 page 22) LAMP/COVER indicator (1 page 53) v/V/b/B (arrow)/ (enter) button (1 page 36) LENS SHIFT dials (VPL-AW15 only) (1 page 22) Ventilation holes (intake) (1 page 13) Note While the ?/1 (On/ standby) indicator lights in orange, the power saving mode is on. (1 page 46) Ventilation holes (exhaust) (1 page 13) Remote control detector (1 page 21) Focus ring (1 page 24) Zoom lever (1 page 24) Rear/Bottom Ventilation holes (exhaust) (1 page 13) REMOTE connector Connects to a computer, etc. for remote control S VIDEO INPUT connector (mini DIN 4-pin)/ VIDEO INPUT connector (phono type) (1 page 19) Y/PB/CB/PR/CR (phono type) (1 page 17) INPUT A connector (1 page 20) HDMI connector (1 page 18) -AC IN socket Location of Controls Ventilation holes (intake) (1 page 13) Lamp cover (1 page 56) Projector suspension support attaching hole (1 page 66) Ventilation holes (intake) (1 page 13) ID label Air filter cover (1 page 57) Adjusters (1 page 24) 9 Remote Control LIGHT button Illuminates the buttons on the remote control. INPUT button (1 page 27) FREEZE button (1 page 35) MENU button (1 page 36) WIDE MODE button (1 page 28) PICTURE MODE buttons (1 page 31) Infrared transmitter ?/1 (On/standby) switch (1 page 22) PIC MUTING button (1 page 35) APA button (1 page 48) RESET button (1 page 39) M/m/Эта инструкция также подходит к моделям:
Проекторы - VPL-AW15 (1.38 mb)