Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Refer to page 34 for details. SHUTTER This functions in the same way as the “SHUTTER” button on the remote control unit. Refer to page 32 for details. OSD DESIGN You can select the background for the OSD from 3 types. TYPE1 Transparent black TYPE2 Solid blue TYPE3 Transparent navy blue SXGA MODE [RGB(SXGA) only] Adjust this item if the projected image overflows from the screen when an SXGA signal is being input. SXGA Select this item normally. SXGA+ When the edges of the projected image are not visible, select this item. XGA MODE [RGB(XGA) only] Adjust this item if the projected image overflows from the screen when an XGA signal is being input. XGA Select this item normally. WXGA Select this item when the edges of the projected image are not visible or the projected image is vertically elongated. BLACKBOARD Set to “ON” when “PICTURE MODE” is set to “BLACKBORD”. (Refer to page 40.) BACK COLOR This sets the color which is projected onto the screen when no signal is being input to the projector. Adjustments and settings ENGLISH-53 Setting up the security function This projector is equipped with a security function. A password input screen can be displayed, or a company URL can be set up and displayed at the bottom of the projected image. # Press the MENU button to display the menu screen. $ Select the “SECURITY” menu from the main menu, and then press the ENTER button. (When you use the “SECURITY” function for the first time) Press the F, H, G, I, F, H, G and I buttons in order, then press the ENTER button. (When a password change has been made before) Type in the changed password, then press the ENTER button. %Press the F or G button to select an item. &Press the I or H button to change the setting. For “PASSWORD CHANGE” and “TEXT CHANGE”, press the ENTER button to display the next screen. INPUT PASSWORD The password input screen can be displayed when the power is turned on. All of the controls other than the POWER button are disabled unless the password is entered correctly. OFF “INPUT PASSWORD” is disabled. ON “INPUT PASSWORD” is enabled. PASSWORD CHANGE Passwords can be changed. Press the ENTER button to display the “PASSWORD CHANGE” screen. # Set a password by pressing the F,G,I, and H buttons. (A maximum of 8 buttons can be set.) $ Press the ENTER button. % Enter the password again for confirmation. & Press the ENTER button. 54-ENGLISH TEXT DISPLAY NOTE: BThe entered password will appear as . It will not be displayed on the screen. BIf you enter the wrong password, an error message will be displayed. Enter the correct password again. You can set text to be displayed at the bottom of the projected image at all times. OFF “TEXT DISPLAY” is disabled. ON “TEXT DISPLAY” is enabled. TEXT CHANGE The text which is displayed when “TEXT DISPLAY” is set to “ON” can be changed. Press the ENTER button to display the “TEXT CHANGE” screen. ........ . . . . . . # Press the F, G, I and H buttons to select the characters, then press the ENTER button. (You can enter 22 characters continuously.) CSelect “DELETE” to delete a character. $ Press the F, G, I and H buttons to select “OK”, then press the ENTER button. CSelect “CANCEL” to cancel the change. Adjustments and settings ENGLISH-55 Wireless setup (PT-LB60NTU only) You need to make adjustments on some items when controlling the projector with a personal computer by means of the wireless network. Refer to the accessory CD-ROM for details. NETWORK Select the network setting you want to use. NAME CHANGE The name for this projector can be set. INPUT PASSWORD Set to “ON” if you want password confirmation to be used when controlling the projector with a personal computer by means of the wireless network. PASSWORD CHANGE Passwords can be changed. WEB CONTROL To control the projector with a personal computer by means of the wireless network, set the “WEB CONTROL” to “ON”. STATUS The wireless settings will be displayed. INITIALIZE Wireless settings can be returned to the factory default settings. 56-ENGLISH ENGLISH-57 Care and maintenance When the TEMP indicator and the LAMP indicator are illuminated There are two indicators on the control panel of the projector which give information about the operating condition of the projector. These indicators illuminate or flash to warn you about problems that have occurred inside the projector, so if you notice that one of the indicators is on, turn off the power and check the table below for the cause of the problem. Problem Indicator display The surrounding temperature or the temperature inside the projector has become unusually high. Illuminated (red) (Lamp unit on) BThe ventilation holes may be covered. BThe ambient temperature in the place of use may be too high. BThe air filter may be blocked. BUncover the ventilation holes. BSet up the projector in a place where the temperature is between 0 °C (32 °F) and 40 °C (104 °F) and the humidity is between 20% and 80% (with no condensation). [If you set the “HIGHLAND” to “ON” (page 52), set ...