Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Use only with a cart or stand recommended by its manufacturer, as being suitable for use with the LCD Projector. 6 Ceiling, wall or shelf mounting for installation should use a mounting kit approved by the manufacturer for use with the LCD Projector and should follow the manufacturer’s instructions. 7 The LCD Projector equipment and cart combinations should be moved with care. Quick stops, excessive force, and uneven surfaces may.cause the equipment and cart combination to overturn. 8 Slots and openings in the cabinet back and bottom are provided for ventilation. To ensure reliable operation of the LCD Projector and to protect it from overheating, these openings must not be blocked or covered. These openings should never be covered with cloth or other material. The bottom opening should not be blocked by placing the LCD Projector on a bed, sofa, rug, or other similar surface. The LCD Projector should not be placed near or over a radiator or heating vent. The LCD Projector should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided. 9 . The LCD Projector should be operated only from the type of power source indicated on the back of the LCD Projector or in the specifications. If you are not sure of the type of power supplied to your home, consult your LCD Projector dealer or local power company. 10 Do not allow anything to rest on the power cord. Do not place the LCD Projector where the cord will be walked on. 11 Follow all warnings and instructions marked on the LCD Projector. 3 12 As a safety feature, the LCD Projector is equipped with a 3-prong grounded plug. The 3-prong grounded plug will fit only into a grounding type power outlet. If the plug does not fit, use an adaptor that is properly grounded or have an electrician install a grounded type outlet. Do not attempt to modify this AC plug. 13 For added protection of the LCD Projector during a lightning storm, or when it is left unattended or not in use for long periods of time, unplug it from the wall outlet and disconnect any cable systems. This will prevent damage to the projector due to lightning and power-line surges. 14 Do not overload wall outlets and extension cords with too many products, because this can result in fire or electric shock. 15 Never push objects of any kind into the LCD Projector through cabinet slots as they may touch dangerous voltage points or short out parts, which could result in a fire or electric shock. 16 Do not attempt to service the LCD Projector yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 17 Unplug the LCD Projector equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the LCD Projector. C. If the LCD Projector has been exposed to rain or water. D. If the LCD Projector does not operate normally when you follow the operating instructions. Adjust only those controls that are covered by the operating instructions; improper adjustment of other controls may cause damage and will often require extensive work by a qualified technician to restore the LCD Projector to normal operation. E. If the LCD Projector has been dropped or the cabinet has been damaged. F. When the LCD Projector exhibits a distinct change in performance - this indicates a need for service. 18 Upon completion of any service or repairs to the LCD Projector, ask the service technician to perform a routine safety check to determine that the LCD Projector is in safe operating condition. 19 When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. 20 Air filter should be cleaned every 100 lamp on hours. The LCD Projector may become too hot if filter is not cleaned when required. 21 If lens becomes dirty, or smudged, clean with a clean, dampened cloth. Never touch the lens with your fingers. 22 Do not look directly into the aperture and lens while operating as this may result in damage to your eyes. 23 Do not look into the red Laser Pointer transmitter, or aim the Laser beam at a person. Shining the Laser beam into the eyes could result in eye damage. 4 Contents of LCD Projector Box Please confirm that the following items are packed in the LCD Projector box. They are provided to help you use or set up your LCD Projector. (1) LCD Projector (2) Remote Control unit (LRQ90044) (3) 2 “AA” Batteries (4) Lens Cap* (5) Carrying Handle* (6) 9.8 Foot UL/CSA Power Cord (VJAS0179) (7) VGA Cable (LSJA0239) (8) PS/2 Mouse Cable (LSJA0212) (9) MAC Mouse Cable (LSJA0214) (10) USB Cable(LSJA0305) (11) VGA MAC Adaptor (LSJA0307) (12) Audio Cable (LSJA02...