Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
If, after the BRIGHT INSIDE adjustment, only the vicinity of the borders of the areas where the pictures overlap and where the pictures do not overlap becomes bright, proceed to adjust the top, bottom, left and right widths. Alternatively, if only the vicinity of the borders has darkened as a result of the width adjustments, proceed with the BRIGHT OUTSIDE adjustment. • When a rear screen or screen with a high gain is used, the joints may appear to be discontinuous depending on the viewing position. Frame delay When 1080/60i, 1 080/50i and 1 080/24sF signals are being input, this simplifies image processing so that the frame delay for pictures can be shortened. 1. Press ^Ў to select “FRAME DELAY”. ADVANCED MENU DIGITAL CINEMA REALITY BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING FRAME DELAY RASTER POSITION MENU SELECT CHANGE AUTO OFF DEFAULT 2. Press <> to switch “FRAME DELAY”. • The setting will change as follows each time <> is pressed. DEFAULT SHORT • DEFAULT: This is the standard setting • SHORT: This causes the pictures to be delayed after the audio. 64 – ENGLISH Note • When “FRAME DELAY” is set to “SHORT”, deterioration in the picture quality will occur. Furthermore, the noise reduction function cannot be used. Pressing ^ button will move the image upward. Pressing Ў button will move the image downward. When 16:9 pictures are displayed (when HDTV or 480p pictures are input or 16:9 is selected in the SIZE mode) Pressing ^ button will move the image upward. Pressing Ў button will move the image downward. Raster position When the whole area where the input picture can be displayed is not used, the picture can be moved to any position inside the display area. 1. Press ^Ў to select “RASTER POSITION”. ¦ PT-DW10000U ADVANCED MENU DIGITAL CINEMA REALITY BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING FRAME DELAY RASTER POSITION MENU SELECT SUB MENU AUTO OFF DEFAULT ENTER Pressing > button will move the image to the right. Pressing < button will move the image to the left. When 4:3 pictures are displayed Pressing > button will move the image to the right. Pressing < button will move the image to the left. 2. Press ENTER. • The “RASTER POSITION” screen will be displayed. 4. Press MENU three times. RASTER POSITION V H 0 ADJUST 0 • The on-screen indications disappear and the normal screen appears again. 3. Press ^Ў<> to adjust the position. ¦ PT-D10000U Pressing > button will move the image to the right. Pressing < button will move the image to the left. When 5:4 pictures are displayed (when SXGA signals are input) Pressing > button will move the image to the right. Pressing < button will move the image to the left. Basic ENGLISH – 65 Setting the DISPLAY LANGUAGE Setting the DISPLAY LANGUAGE This lets you switch the display language. ^Ў<> ENTER MENU MENU Press to display the Press to display thePress to display the MAIN MENU screen. MAIN MENU screen.MAIN MENU screen. Press to select “DISPLAY Press to select “DISPLAYPress to select “DISPLAY LANGUAGE”. LANGUAGE”.LANGUAGE”. Press to display the Press to display thePress to display the “DISPLAY LANGUAGE” “DISPLAY LANGUAGE”“DISPLAY LANGUAGE” menu. menu.menu. Changing the displaylanguage This lets you switch the on-screen display language. 1. Press ^Ў to select the desired language. ENTER 2. Press ENTER to establish your selection. • When this is selected, the language display will turn a light green. • Menus, setting items, adjustment screens, and control button names will be displayed in the language the user chooses. • The available languages are: English, German (DEUTSCH), French (FRANCAIS), Spanish(ESPANOL), Italian (ITALIANO), Japanese ( ), Chinese ( ), Russian (русский), and Korean ( ). Note • The on-screen display of the projector is set to the English language on shipping. MAIN MENU PICTURE POSITION ADVANCED MENU DISPLAY LANGUAGE OPTION1 OPTION2 TEST PATTERN SIGNAL LIST NETWORK SECURITY MENU SELECT SUB MENUENTER 66 – ENGLISH This menu can be used to make a variety of picture and projector settings. Press to display the MAIN MENU screen. Press to select “OPTION1”. Press to display the “OPTION1” menu. MENU Press to display the MAIN MENU screen. Press to select “OPTION1”. Press to display the “OPTION1” menu. MAIN MENU PICTURE POSITION ADVANCED MENU DISPLAY LANGUAGE OPTION1 OPTION2 TEST PATTERN SIGNAL LIST NETWORK SECURITY MENU SELECT SUB MENUENTER Adjusting color matching When multiple sets are used simultaneously, this projector allows the user to correct the difference of colors among the sets. 1. Press ^Ў to select “COLOR MATCHING”. 2. Press <> to switch “COLOR MATCHING”. The setting will change as follows each time <> is pressed. OFF 3COLORS 7COLORSMEASURE OFF: Color matching adjustment is not carried out. 3COLORS: It is possible to adjust the 3colors of “R (Red)”, “G (Green)” and “B (Blue)”. 7COLORS: It is possible to adjust the 7colors of “R (Red)”, “G (Green)”, “B (Blue)”, “Cy (Cyan)”, “Mg (Magenta)”, “Ye (Yellow)” and “Wh (White)”. MEASURE...