Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
The projector is capable of accepting HDTV data through a YPBPR connector. Use a HDTV cable that came with your projector to display HDTV images. The following standards are supported in the HDTV function: • 480i • 480p • 720p • 1080i Please refer to "Menu System" on page 13 for information on the HDTV OSD selections. Installation BenQ DX/S660 DX/S650 User’s Guide Connecting to Various Equipment It only takes a few seconds to connect your projector to your desktop or notebook computer, VCR, or other systems. However, a Mac adapter (an optional accessory) is needed for connection to Macintosh computers. I / DVD Player I Monitor VIDEO L R AUDIO S-VIDEO 10 Installation BenQ DX/S660 DX/S650 User’s Guide OPERATION Start Up 1. Plug the power cord into a wall socket. 2. Turn on the main power switch. 3. Press POWER to start the unit. The back-lit POWER key flashes green and stays green when the power is turned on. Projector Remote Control (When the power is turned off, there is a 60-second cooling period before the projector can be re-started.) 4. Switch on all connected equipment. Operation 11 BenQ DX/S660 DX/S650 User’s Guide Digital Keystone Correction Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. To correct this, press KEYSTONE +/- (hot key) on the control panel of the projector or on the remote control, and then adjust the sliding bar labeled Keystone, as needed. Press + to correct keystoning at the top of the image. Press - to correct keystoning at the bottom of the image. Projector Remote control Auto Adjustment In some cases, you may need to optimize the picture quality. To do this, press the AUTO key on the control panel of the projector or on the remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust settings to provide the best picture quality. Projector Remote control AutoSourceAuto 12 Operation BenQ DX/S660 DX/S650 User’s Guide Source Selection When several input sources are available, press the SOURCE key to make a selection from the control panel of the projector or the remote control. Projector Remote control AutoSourceSource Menu System Press Menu for the main menu, and then press 3or 4 to select a sub-menu. Press Menu again to select items in the sub-menu. Menu Bar Sub-menu Display Image Source Control PIP PC Keystone Brightness Contrast Phase H.Size Ratio H-position V-position Color Temp Information Mirror Source Volume Treble Bass Mute Langauge OSD Setup Default Video Mode Lamp hour Main page: PIP Source PIP Size PIP Pos. H. Position V.Position More Options Sub Page: Brightness Contrast Color Tint Sharpness System Y/Pb/Pr Ratio H-position V-position Color Tint Color Temp Video Keystone Brightness Contrast Color Tint Ratio System Sharpness Color Temp Information Operation 13 BenQ DX/S660 DX/S650 User’s Guide 1. Display Menu FUNCTION DESCRIPTION Keystone Corrects any keystoning of the image. - Brightness Adjusts the brightness of the image. Contrast Adjusts the degree of difference between dark and light in the image. Phase Adjusts to avoid the occurrence of flicker. *This function is not available when the input mode is Video or S- Video. H.Size Adjusts to fit in the desired image size. *This function is not available when the input mode is Video or S- Video. Color Increases or decreases the color range (R, G, B) of the image. *This function is not available when the input mode is PC. Tint Adjusts the image to make it appear more red or blue. *This function is not available when the input mode is PC. 14 Operation BenQ DX/S660 DX/S650 User’s Guide 2. Image Menu FUNCTION DESCRIPTION Ratio Users have 3 options for the image ratio. 1. 1:1 2. 4:3 3. 16:9 H-position Adjusts the horizontal position of the projected image. V-position Adjusts the vertical positon of the projected image. Color Temp. Adjusts the color temperature to fit your preference. Information Shows the current resolution. System System information will be shown: 1. Auto 2.NTSC 3. PAL 4.SECAM *The default setting for System is Auto. Sharpness Adjusts the image to make it look sharper or softer. *This function is not available when the input mode is PC or YPBPR. Color Increases or decreases the color range (R, G, B) of the image. *This function is not available when the input mode is PC. Tint Adjusts the image to make it appear more red or blue. *This function is not available when the input mode is PC. Operation 15 BenQ DX/S660 DX/S650 User’s Guide 3. Source Menu FUNCTION DESCRIPTION Mirror 1. Default 2. Ceiling mounted projection 3. Rear screen projection 4. Ceiling mounted and rear- screen projection Source Selects the input source from among PC, Video, S-Video, and YPBPR. Volume Adjusts the volume level. Treble Adjusts the treble level. Bass Adjusts the bass level. Mute Off On 16 Operation BenQ DX/S660 DX/S650 User’s Guide 4. Control Menu FUNCTION DESCRIPTION Language Language sets the language for the OSD control menus. Use ...
Эта инструкция также подходит к моделям:Проекторы - DX/S650 (888.67 kb)