|
Фрагмент инструкции
Press MENU to activate the menus. 2. Use the ^ or Ў key to select Service and press ENTER. The service window opens. 3. Use the ^ or Ў key to select Diagnosis and press ENTER. The diagnosis screen will be displayed. 4. Use the ^ or Ў key to select Voltages and press ENTER. The Voltage overview menu will be displayed. Image 14-12 Image 14-13 Image 14-14 Image 14-15 Use the ^ or Ў item in the menu to select the previous or next page with information. R59770057 CLM HD8 15/03/2010 14.Servicemenu 14.3.4 I.C diagnosis How to select? 1. Press MENU to activate the menus. 2. Use the ^ or Ў key to select Service and press ENTER. The service window opens. 3. Use the ^ or Ў key to select Diagnosis and press ENTER. The diagnosis screen is displayed. 4. Use the ^ or Ў key to select I2C and press ENTER. The I.C diagnosis overview is displayed. Image 14-16 Image 14-17 Image 14-18 Image 14-19 14.3.5 Temperatures How to get an overview? 1. Press MENU to activate the menus. 2. Use the ^ or Ў key to select Service and press ENTER. The service window opens. 3. Use the ^ or Ў key to select Diagnosis and press ENTER. The diagnosis screen will be displayed. 4. Use the ^ or Ў key to select Temperatures and press ENTER. The Temperature overview menu will be displayed. R59770057 CLM HD8 15/03/2010 14.Servicemenu Image 14-20 Image 14-21 Image 14-22 Image 14-23 Use the ^ or Ў item in the menu to select the previous or next page with information. 14.3.6 Fan speeds overview How to get an overview? 1. Press MENU to activate the menus. 2. Use the ^ or Ў key to select Service and press ENTER. The service window opens. 3. Use the ^ or Ў key to select Diagnosis and press ENTER. The diagnosis screen will be displayed. 4. Use the ^ or Ў key to select Fan speeds and press ENTER. The Fan speeds overview menu will be displayed. The current value is given together with the minimum required value in the following way : current value > minimum required value. Image 14-24 Image 14-25 Image 14-26 R59770057 CLM HD8 15/03/2010 14.Servicemenu Image 14-27 Use the ^ or Ў item in the menu to select the previous or next page with information. 14.3.7 SPI How to get an overview 1. Press MENU to activate the menus. 2. Use the ^ or Ў key to select Service and press ENTER. The service window opens. 3. Use the ^ or Ў key to select Diagnosis and press ENTER. The diagnosis screen will be displayed. 4. Use the ^ or Ў key to select SPI and press ENTER. The SPI overview menu will be displayed. Image 14-28 Image 14-29 Image 14-30 Image 14-31 14.3.8 Error logging overview How to get an overview? 1. Press MENU to activate the menus. 2. Use the ^ or Ў key to select Service and press ENTER. The service window opens. R59770057 CLM HD8 15/03/2010 14.Servicemenu 3. Use the ^ or Ў key to select Diagnosis and press ENTER. The diagnosis screen will be displayed. 4. Use the ^ or Ў key to select Error logging and press ENTER. The Error logging overview menu is displayed. For more explanation about the stored error message, see "Error codes", page 205. Image 14-32 Image 14-33 Image 14-34 14.4 Internal service patterns How to select 1. Press MENU to activate the menus. 2. Use the ^ or Ў key to select Service and press ENTER. The service window opens. 3. Use the ^ or Ў key to select Internal service patterns and press ENTER. The internal service pattern window opens. 4. Use the ^ or Ў key to select the desired patterns and press ENTER. When a pattern is selected, press ENTER to toggle to other patterns of the selected type. Press EXIT to return to the internal service pattern menu. Image 14-35 Image 14-36 Image 14-37 14.5 Restore factory defaults What can be done? All settings of the projector will be set to the original factory settings with the exception of the IP address, serial settings, DMX settings and High altitude mode. For these settings the choice exists to exclude them in the reset operation. . Howtomake anexception 1. Press MENU to activate the menus. R59770057 CLM HD8 15/03/2010 14.Servicemenu 2. Use the ^ or Ў key to select Service and press ENTER. The service window opens. 3. Use the ^ or Ў key to select Restore factory defaults and press ENTER. The factory defaults confirmation window opens. 4. Use the ^ or Ў key to select the setting to exclude and press ENTER to toggle between [No] and [Yes]. Repeat this step if necessary for the other settings. Image 14-39 Image 14-38 Image 14-40 How to return to the default settings 1. Press MENU to activate the menus. 2. Use the ^ or Ў key to select Service and press ENTER. The service window opens. 3. Use the ^ or Ў key to select Restore factory defaults and press ENTER. The factory defaults confirmation window opens. 4. Use the ^ or Ў key to select Yes or No and press ENTER. If you are sure to restore the factory defaults and to erase the custom settings, select Yes. If you are not sure, select No. Image 14-41 Image 14-42 Image 14-43 14.6 Save custom settings What is done? The current custom settings can be saved to the internal ...
Эта инструкция также подходит к моделям:Проекторы - CLM HD8 R59770057 (12.69 mb)
Проекторы - CLM HD8 R9050130 (12.69 mb)
Проекторы - CLM HD8 R90501301 (12.69 mb)