Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
BarcoMed control panel operation Figure 22 Barco Tab Barco System Report The Barco System Report, also known as BarcoMed SelfExam, is a wizard based tool which collects data about the components that are installed in your system. This information is used by the Barco MID Support team when trying to resolve customer issues. MediCal QAWeb/MediCal Pro/NioWatch Clicking on the MediCal QAWeb/MediCal/NioWatch Pro button will launch the softcopy QA application that is installed on your system. Please refer to the MediCal QAWeb, MediCal Pro, or NioWatch manual for information about this application. BarcoMed control panel operation Advanced Properties To access the advanced properties configuration pages for your Barco display controller(s), click on the Advanced button in the Graphics Device Information section. BarcoMed advanced configuration There are two pages accessible from the advanced configuration button. They are: • Barco Drawing Modes • Device Details These two pages replace the following three pages found in earlier versions of the BarcoMed display controller drivers. • the BarcoMed Driver Tab, • the BarcoMed Hardware Tab, and • the BarcoMed Display Tab. Barco Drawing Modes The Barco Drawing Modes page of the Advanced Properties page is divided into four sections: Palette Mode, Drawing Modes, Monitor Configuration, Graphics Board. Palette Mode In the Palette Mode section you can choose one of the four following Palette Modes. If you are using a color display in conjunction with your Barco grayscale display(s), prior to selecting a palette mode please make certain that you have configured your Windows desktop correctly. (See the section Setting the resolution of your CORONIS display on page 102.) Color to Gray Compatibility Use this palette option for applications, such as Java, which require True Color support. Such applications may not work correctly when using one of Barco's three “Standard 8-bit (256-color)” palette modes. All BarcoMed control panel operation applications that are designed to work correctly with 8-bit (256-color) modes should continue to work normally. Note: Ditherng is not used while in this mode. Also, direct access to the hardware through DirectDraw is not allowed in this mode. User Modifiable Color Palette This option allows applications to modify the palette contents dynamically. This mode reserves the first 10 and last 10 entries in the palette for the Windows operating system, but applications can manipulate the middle 236 entries. This is the standard palette mode as configured by Windows. Static Gray Palette including standard system colors This option sets the palette to be a static linear set of 236 gray values. The 20 standard system colors are converted from RGB to gray values and are added to the 236 static gray values. Applications are denied the ability to dynamically change or allocate palette entries. Static Gray Palette with NO system colors This option sets the palette to be a static linear ramp of 256 shades of gray. Applications are denied the ability to dynamically change or allocate palette entries. Drawing Modes In the Drawing Mode section you can choose from the following Drawing Modes. If any of the options in this section are grayed out, then they are not available for the model controller with which you are working. Enable DirectDraw This option allows the user to enable or disable DirectDraw. DirectDraw is a software interface that provides direct access to display devices 68 BarcoMed control panel operation while maintaining compatibility with the Windows graphics device interface (GDI). DirectDraw is enabled by default. More information about DirectDraw is available through the on-line help. Enable Dithering This option allows the user to enable or disable dithering. Dithering is a technique for increasing the perceived range of colors in an image at the cost of spatial resolution. Note: This option is only available when the User Modifiable Palette mode is selected. If either the Static Gray Palette including Standard System Colors mode or the Static Gray Palette with NO System colors mode is selected, the “Enable Dithering” check box will be grayed-out, and dithering will be automatically disabled. More information about Dithering is available through the on-line help. Disable 10-bit grayscale Use this option for standard Windows®-based applications that require 8-bit color support (256 colors), such as Internet Explorer, Excel, etc. Do not use this option for applications that require 10-bit pixel support (1024 simultaneous shades of gray) and use extended depth graphic libraries such as WinBarco. Description of 10-bit grayscale To show 1024 simultaneous shades of gray all BarcoMed “H” series display controllers, such as the BarcoMed 5MP2FH or BarcoMed Coronis or example, run in extended depth (10-bit) mode by default. Implications When turned on the “Disable 10-bit grayscale” option causes a BarcoMed Coronis display controller to run in 8-bit mode,...
Эта инструкция также подходит к моделям:Проекторы - CORONIS MFGD 2621 (1.89 mb)