Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
Goto Layout > Main window > Size 2. Enter the value for the Height as follow: Total Vertical screen resolution / 2 -0.5 x overlap zone. 3. Position remains the same. (image 12-54, image 12-55, image 12-56, image 12-57) Image 12-54 Image 12-55 Image 12-56 R59770021 CLM R10+ 11/10/2010 12.Alignmentmenu Image 12-57 How to set for the second projector 1. Goto Layout > Main window > Size 2. Enter the value for the Width as follow: Total Vertical screen resolution / 2 -0.5 x overlap zone. 3. Position = original start + Vertical height projector 1 -overlap zone (image 12-58, image 12-59, image 12-60, image 12-61, image 12-62) 12.11.7 ScenergiX size adjustment (White level) What can be done with the white level menu? The white level menu contains top, bottom, left or right item to set the blending zone. Image 12-58 Image 12-59 Image 12-60 Image 12-61 Image 12-62 The ScenergiX menu items are only accessible when status is [On]. How to set the blending zone? 1. Press MENU to activate the menus. 2. Use the ^ or Ў key to select Alignment and press ENTER. 3. Use the ^ or Ў key to select ScenergiX and press ENTER. 4. Use the ^ or Ў key to select White level and press ENTER. R59770021 CLM R10+ 11/10/2010 12.Alignmentmenu 5. Use the ^ or Ў key to select one of the four size adjustments and press ENTER. (image 12-63, image 12-64, image 12-65, image 12-66) A pattern with the different areas is displayed. (image 12-67) 6. Use the cursor keys to move the border of the overlap area to the desired position. Set first the width for the first projector and repeat for the second one. (image 12-68, image 12-69) Image 12-63 Image 12-65 Image 12-64 Image 12-66 Image 12-67 Width selections R59770021 CLM R10+ 11/10/2010 12.Alignmentmenu Image 12-68 Width set up for projector 1 Image 12-69 Width set up for projector 2 12.11.8 Adjusting the black level of the images Why black level adjustment For dark images, the overlap zone will be brighter then the rest of the images. Typically for DLP projectors, next to the overlap zone, a brighter area is recognized. This area is known as a DLP leakage area. This area must also be exclude for the black level adjustment. Therefore we can rise the black level of the remaining image (excluding the overlap zone and the DLP leakage area). First, the width of the leakage area must be set. The white cursor line indicates the border of the overlap area. The green cursor line indicates the current installed DLP leakage area border and starts at the position of the white cursor line (no width installed). This green line can be moved to the border of the DLP leakage area with the cursor keys. R59770021 CLM R10+ 11/10/2010 12.Alignmentmenu Image 12-70 DLP Leakage area set up After the area is set, use TEXT key to remove the area border lines when adjusting the black level. How to set the leakage area width 1. Press MENU to activate the menus. 2. Use the ^ or Ў key to select Alignment and press ENTER. 3. Use the ^ or Ў key to select ScenergiX and press ENTER. 4. Use the ^ or Ў key to select Black level and press ENTER. 5. Use the ^ or Ў key to select one of the four size adjustments and press ENTER. (image 12-71, image 12-72, image 12-73, image 12-74, image 12-75) 6. Use the cursor keys to move the green border line to the desired position. The leakage area for this overlap is defined and will be excluded during black level adjustment. Image 12-71 Image 12-73 Image 12-72 R59770021 CLM R10+ 11/10/2010 12.Alignmentmenu Image 12-74 Image 12-75 DLP leakage area 1 Overlap area 2 DLP Leakage area How to adjust 1. Press MENU to activate the menus. 2. Use the ^ or Ў key to select Alignment and press ENTER. 3. Use the ^ or Ў key to select ScenergiX and press ENTER. 4. Use the ^ or Ў key to select Black level and press ENTER. (image 12-76, image 12-77, image 12-78, image 12-79) 5. Adjust the black level of area A until the black level of area A, B and C are equal. Use the Adjust function All, Red, Green and Blue in the Black level menu. (image 12-80) R59770021 CLM R10+ 11/10/2010 12.Alignmentmenu Image 12-76 Image 12-77 Image 12-78 C A B Image 12-79 Image 2 Image 1 Image 12-80 Black level adjustment RGB R 12 13 G B 11 Use the Reset function to bring all ScenergiX settings back to zero. R59770021 CLM R10+ 11/10/2010 13.Projectorcontrol 13. PROJECTOR CONTROL About this chapter This chapter explains the setup of the control part of the software such as projector address and all types of communication with the external world. Overview • Overview flow • Projector address • Serial communication • Network • IR control switching • DMX • Buttons • Menu position • Local LCD contrast • Language selection 13.1 Overview flow Overview Level 1 Level 2 Level 3 Projector control Projector address Projector address Common address Serial communication Baud rate [115200] Interface standard [RS232/RS422] Network DHCP [ON/OFF] IP-address Subnet mask Default gateway IR control IR Front [On/Off] IR Back [On/Off] DMX DMX address DMX universe DMX ...
Эта инструкция также подходит к моделям:Проекторы - CLM R10+ R9050100 (12.78 mb)
Проекторы - CLM R10+ R90501001 (12.78 mb)