Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
(continued on next page) SCREEN Menu SCREEN Menu (continued) Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturing an image from the current screen. Please wait for the target image to be displayed, and press the ENTER button when the image is displayed. The image will freeze and the frame for capturing will appear. To stop performing, press the RESET or ESC button. 2. Using the ^/Ў/ buttons adjusts the frame position. Please move the frame to the position of the image which you want to use. The frame may not be able to be moved for some input signals. To start registration, press the ENTER button. To restore the screen and return to the previous dialog, press the RESET or ESC button. Registration takes several minutes. When the registration is completed, the registered screen and the following message is displayed for several seconds: “MyScreen registration is finished.” If the registration failed, the following message is displayed: “A capturing error has occurred. Please try again.” • This function cannot be selected when the TURN ON is selected to the MyScreen Lock item (.below). • This function cannot be selected when the TURN ON is selected to the MyScreen PASSWARD of SECURITY item in OPTION menu (.43). MyScreen Lock Using the ^/Ў buttons turns on/off the MyScreen lock function. TURN ON o TURN OFF When the TURN ON is selected, the MyScreen item is locked. Use this function for protecting the current MyScreen. • This function cannot be selected when the TURN ON is selected to the MyScreen PASSWARD of SECURITY item in OPTION menu (.43). .............................................................................................................................................................................. ............................................................................................................................................................................................................ .......................... (continued on next page) SCREEN Menu SCREEN Menu (continued) Item Description MESSAGE Using the ^/Ў buttons turns on/off the message function. TURN ON o TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting “NO INPUT IS DETECTED” “SYNC IS OUT OF RANGE” “Searching….” while searching for the input “Detecting….” while an input signal is detected The indication of the input signal displayed by changing The indication of the aspect ratio displayed by changing The indication of the PICTURE MODE displayed by changing The indication of the MY MEMORY displayed by changing The indication of “FREEZE” and “II” while freezing the screen by pressing the FREEZE button. • When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (.19). SOURCE NAME Each input port for this projector can have a name applied to it. (1) Use the ^/Ў buttons on the SCREEN menu to select SOURCE NAME and press the > button. The SOURCE NAME menu will be displayed. (2) Use the ^/Ў buttons on the SOURCE NAME menu to select the port to be named and press the > button. Right side of the menu is blank until a name is specified. The SOURCE NAME dialog will be displayed. (3) The current name will be displayed on the first line. Use the ^/Ў/ buttons and the ENTER or INPUT button to select and enter characters. The RESET button can be used to erase 1 character at a time. The name can be a maximum of 16 characters. (4) To change an already inserted character, press the ^ button while the cursor is on the [A-N] row to move the cursor to the name displayed on the first line and use the buttons to select character to be changed. Once a character in the name is selected use the Ў button to move the cursor back down to the character entry area to select and enter characters as described above. (5) Select and press the ENTER or INPUT buttons when finished entering text. To revert to the previous name without saving changes press the ESC or < button and the INPUT button simultaneously. .......................................................................................................................................................................................................................... ...................................................................................................................................................................................................................................................................................................................................................................................................................... .....................
Эта инструкция также подходит к моделям:Проекторы - CPX1 (3.46 mb)