Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The filament is broken. Change the bulb. 2. the lamp is not fully plugged in its holder: Out of focus or blurring image 1. The object is too close to the lens. 2. Focus is on the max. point of “Tele” press “Wide”. 3. Auto-focus is not on: press AF again. 4. Fog on the lens in damp climate. It will disappear gradually when the equipment warms up. If the problem still remains after checking the above, consult your dealer or authorized service personnel. PACKING LIST AND ACCESSORIES: Item Quantity Power cord 1 VGA Cable 1 User Manual 1 Spare Fuse 1(installed in the power receptacle) USB Cable 1 Service and Support: Manufacturer’s Website: Technical Support: support@hamiltonelectronics.com ...
Эта инструкция также подходит к моделям:Проекторы - VP-30 (333.91 kb)
Проекторы - VP-30 (333.91 kb)
Проекторы - VP-30 (333.91 kb)
Проекторы - VP-30 (333.91 kb)