Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Electronic Board Electronic Board ................................ [On] [Off] 1 1 Press the Set-up Key . • The set-up screen is displayed. Note • The item “Setting the number of copies” is displayed at the top of the set-up menu only when the printer is connected. 2 2 Press the Set-up Key ( ) repeatedly to select the following item. Setting the Unit 3 3 Press the Advance Key ( ) repeatedly to select (On) or (Off). • When the scanning time display is set to “off”, the following screen is displayed. 4 4 Press the Mode Key ( ) to return to standby mode. File format set-up It is possible to select the file format for outputting images to a USB flash memory device, SD memory card or computer. 1 1 Press the Set-up Key . • The set-up screen is displayed. 2 2 Press the Set-up Key ( ) repeatedly to select the following item. 3 3 Press the Advance Key ( ) repeatedly to select (PDF) or (JPEG). • When PDF is selected, all images are saved as PDF files. • When JPEG is selected, all images are saved as JPEG files. 4 4 Press the Mode Key ( ) to return to standby mode. Note • When JPEG is selected, images will be rotated 90 degrees and saved. Use a graphic software to rotate the image back to the position it was displayed on the screen. Using Setting the Unit Setting the current time Setting for Full Size Scanning (UB-5838C only) When images are scanned in full size mode, they are stretched and enlarged in order to utilize the entire space of a page. ElectronicBoardElectronicBoard 1 1 [Regular size] [Full size] Press the Set-up Key . • The set-up screen is displayed. 2 2 Press the Set-up Key ( ) repeatedly to select the following item. 3 3 Press the Advance Key ( ) repeatedly to select (Regular) or (Full size). 4 4 Press the Mode Key ( ) to return to standby mode. 1 1 It is possible to set the current time for the unit clock. Press the Set-up Key . • The set-up screen is displayed. 2 2 Press the Set-up Key ( ) repeatedly to select the following item. 3 3 Press the Advance Key ( ). • The time set-up screen is displayed. Select the desired setting you wish to change by pressing the Advance Key ( ) repeatedly. The value of each setting can be changed by pressing the Set-up Key ( ). • By pressing the Start/Stop Key repeatedly, it is possible to change the date format as follows: “D/M/Y” “M/D/Y” “Y/M/D” 4 4 *D: Day / M: Month / Y: Year Press the Mode Key ( ) to set the time and return to standby mode. Setting the Unit Setting the Password To prevent third parties from operating the unit, it is possible to set the unit to require a password to be entered when the power is turned on or after a certain period of time has passed. 1 1 Press the Set-up Key . • The set-up screen is displayed. 2 2 Press the Set-up Key ( ) repeatedly to select the following item. 3 3 Press the Advance Key ( 4 4 ). If the password has already been set, enter the 5 5 4-digit password. Press the Advance Key ( ) repeatedly to select (Password on) or (Password off). 6 6 Press the Set-up Key ( ) and determine the password settings. • If the password setting has been set to “off”, the unit will return to standby mode. • If the password setting is set to “on”, proceed to perform the following operations. 7 7 Press the Advance Key ( ) and set the interval of time after which the password will need to be entered. • The interval for entering the password can be selected from 15 minutes / 30 minutes / 1 hour / 2 hours / 4 hours / 8 hours. 8 8 Press the Set-up Key ( ) and determine the interval for entering the password. 9 9 When the password input display appears, press the Mode Key ( ), the Set-up Key ( ), or the Advance Key ( ) to enter the new 4-digit password and return to standby mode. Note • Do not forget the Password. If you forget the Password, call your dealer. Using Setting the Unit Testing the Printer By performing the Test Print feature, it is possible to clean the printer head from this unit when scanned images are not printed correctly (ex. certain areas appear blank). Once the printer head is cleaned, the following pattern will be printed. If the pattern is printed as shown below, the problem has been fixed. If the pattern is not printed as shown below, refer to the manual of the printer for details. 1 1 • This pattern is printed in color. Press the Set-up Key . • The set-up screen is displayed. 2 2 Press the Set-up Key ( ) repeatedly to select the following item. • If this item is not displayed, the unit does not recognize the printer. Make sure that the printer is connected properly. 3 3 Press the Advance Key ( ). • The printer head is cleaned and the pattern shown above is printed. 4 4 Press the Mode Key ( ) to return to standby mode. Note • If the test pattern is not printed correctly, it is time to replace the ink cartridge. Refer to the manual of the printer and replace the ink cartridge. • For information regarding available printers, refer to the following site: ub-5838c_info.htm Daily Care and M...
Эта инструкция также подходит к моделям:Проекторы - UB-5838C (5.15 mb)
Проекторы - UB-5338C (5.15 mb)
Проекторы - UB-5338C (5.15 mb)