Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
See insert for approval label. 1 This respirator helps protect against certain particles. Misuse may result in sickness or death. For proper use, see supervisor, or User Instructions, or call 3M in U.S.A., 1800- 247-3941. In Canada, call Technical Service at 1-800-267-4414. IMPORTANT Before use, wearer must read and understand these User Instructions. Keep these instructions for reference. Use For Solids such as those from processing minerals, coal, iron ore, flour, and certain other substances. Liquid or non-oil based particles from sprays that do not also emit oil aerosols or vapors. Do Not Use For Gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting. This respirator does not supply oxygen. Use Instructions 1. Failure to follow all instructions and limitations on the use of this respirator and/or failure to wear this respirator during all times of exposure can reduce respirator effectiveness and may result in sickness or death. 2. Before occupational use of this respirator, a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 such as training and fit testing and applicable OSHA substance specific standards. In Canada, CSA standard Z94.4-93 requirements must be met. 3. The particles which can be dangerous to your health include those so small that you cannot see them. 4. Leave the contaminated area immediately and contact supervisor if dizziness, irritation, or other distress occurs. 5. Store the respirator away from contaminated areas when not in use. 6. Dispose of used product in accordance with applicable regulations. Use Limitations 1. This respirator does not supply oxygen. Do not use in atmospheres containing less than 19.5% oxygen. 2. Do not use when concentrations of contaminants are immediately dangerous to life and health, are unknown or when concentrations exceed 10 times the permissible exposure limit (PEL) or according to specific OSHA standards or applicable government regulations, whichever is lower. 3. Do not alter, abuse or misuse this respirator. 4. Do not use with beards or other facial hair or other conditions that prevent a good seal between the face and the sealing surface of the respirator. 2 Time Use Limitations If respirator becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area immediately and replace the respirator. Fitting Instructions Must be followed each time respirator is worn. Fig.1Fig. 2 Fig. 3 Fig. 4 1. Cup the respirator in your hand, with the nosepiece at your fingertips, allowing the headbands to hang freely below your hand. 2. Position the respirator under your chin with the nosepiece up. Pull the top strap over your head resting it high at the top back of your head. Pull the bottom strap over your head and position it around the neck below the ears. 3. Place your fingertips from both hands at the top of the metal nosepiece. Using two hands, mold the nose area ...
Эта инструкция также подходит к моделям:Прочие персональные приборы - RESPIRATOR N95 PARTICULATE 8211 (53.68 kb)