Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Before you travel home, avoid any bright afternoon and evening light and use your goLITE BLU energy light in the morning for a few days (see above under ‘Travelling east’). For more instructions on how to avoid jet lag, visit charging Note:You can also use the appliance while it is charging. The goLITE BLU energy light comes with a 9.5V AC/DC adapter that operates on voltages ranging from 100 to 240 volts to allow worldwide use. The adapter comes with a set of exchangeable adapter plugs that fit most common worldwide wall sockets. 1 2 Put the adapter in the wall socket. Insert the appliance plug into socket on the appliance (Fig. 4). Only the outline of the charge indication is visible. , As the battery charges, the four bars of the charge indication flash , one by one and fill as the charge increases. When the battery is fully charged, the charge indication stops , flashing. Note: Charge the goLITE BLU energy light at least 8 hours before you use it for the first time. Charging normally takes 3 to 4 hours. Note:When the battery is fully charged, it contains enough energy for 3 to 5 treatments. installation 1 2 Remove the stand from the stand storage cavity (Fig. 5). Insert the bevelled end of the stand into the hole on the back of the appliance. Magnets hold the stand in place (Fig. 6). EnglisH 15 3 Place the goLITE BLU energy light approximately 50-75cm from your eyes in such a way that the light bathes your face from the side (Fig. 7). -You can read, eat, work at the computer, watch TV or exercise while you use your goLITE BLU energy light. -For the best results, place the goLITE BLU energy light at the same level as your midriff (stomach area), e.g. place it on the table at which you are sitting. Note: Do not stare into the light of the LED panel. It is sufficient that the blue light reaches your eyes indirectly from the side. -Use your goLITE BLU energy light in a well-lit room to minimise eye strain. setting the clock 1 ,2 ,3 4 5 Press the on/off button briefly to switch on the appliance (Fig. 8). The touchscreen display goes on. Press the alarm button and the timer button simultaneously for 2 seconds (Fig. 9). The clock time starts to flash on the display (Fig. 10). Set the clock time with the plus or minus button. If you keep the button pressed, the time moves forward or backward quickly (Fig. 11). To switch between the 12-hour (a.m./p.m.) and 24-hour time indication, press the timer button and minus button simultaneously for 2 seconds. Press either the alarm button or the timer button or wait 10 seconds to exit the time-setting mode. setting the timer You can use the timer function to set the treatment time. 1 Press the on/off button briefly to switch on the appliance (Fig. 8). The touchscreen display goes on. ,2 Press the timer button (Fig. 12). 16 EnglisH The timer on-indication and the timer countdown time start to , flash (Fig. 13). 3 Press the plus or minus button to set the treatment time. If you keep the button pressed, the time moves forward or backward quickly (Fig. 11). You can set a time from 1 to 60 minutes. The set session time is stored in the memory. , The timer-on indication and the timer countdown time stop , flashing. Note:When you switch on the appliance, the timer counts down the set time. When the countdown is finished, the LED panel switches off automatically. Demo mode The demo mode is used to demonstrate the goLITE BLU energy light in shops. When the appliance is switched on in demo mode, customers of the shop can: -adjust the light intensity -switch the appliance on and off -set the alarm -set the treatment time If the appliance is not operated for 3 minutes, it rever ts to its demo mode default settings. To activate the demo mode: 1 Make sure the appliance is switched off. Note: If you want to switch off the appliance, press and hold the on/off button for 2 seconds. 2 3 Put the adapter in the wall socket and insert the appliance plug into socket on the appliance. Press and hold the on/off button for 10 seconds (Fig. 8). The appliance switches on and the word ‘DEMO’ appears on the , display. The LED panel goes on at a light intensity of 25%. , EnglisH 17 The display shows a timer countdown time of 15 minutes, but the , timer does not count down. It only starts to count down when the timer time is adjusted. The display shows an alarm time of 12:00 a.m. and shows the , normal clock time, but the alarm mode is off. Note: The appliance remains switched on in demo mode until it is switched off. To deactivate the demo mode, press and hold the on/off button for 10 seconds. using the appliance 1 Press the on/off button briefly to switch on the appliance (Fig. 8). The touchscreen display goes on. , Note: If you do not touch the display or press any button for 5 minutes when the display is switched on and the appliance operates on battery power, the appliance switches off automatically to save battery power. Note: If you want to switch off the appliance, press...
Эта инструкция также подходит к моделям:Прочие персональные приборы - HF3330/01 (1.24 mb)