Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
During that period the relatively low light levels of a simulated natural sunrise prepare our body for waking up and getting aler t. People who use the Wake-up Light wake up more easily, have a better overall mood in the morning and feel more energetic. Because the sensitivity to light differs per person, you can set the light intensity of your Wake-up Light to a level that matches your light sensitivity for an optimal star t of the day. For more information about the Wake-up Light, see general description (Fig. 1) A Top cover with vents B Lamp housing C Power cord D Antenna E Display 1 Clock time/alarm time 2 Light intensity symbol 3 Radio symbol 4 ‘Bird’ sound symbol 5 ‘Yoga’ sound symbol 6 ‘Cowbell’ sound symbol 7 ‘Forest’ sound symbol 8 ‘USB stick’ symbol 9 Radio frequency symbol 10 Volume level symbol 11 Display brightness symbol 12 Dusk simulation symbol 13 Alarm sound symbol 14 Alarm 2 symbol 15 Alarm 1 symbol 16 Clock time symbol F Menu ‘-’ button g MENU button H SELECT button (also FM presets selection) i Menu ‘+’ button J Control lever with ‘alarm off ’, ‘alarm 1’ and ‘alarm 2’ positions K USB socket EnglisH 11 l Buttons on the side of the appliance 1 Light intensity increase button 2 Lamp on/off button 3 Light intensity decrease button 4 Volume increase button 5 Radio on/off button 6 Volume decrease button Preparing for use Before first use 1 Place the Wake-up Light 16-20in/40-50cm from your head, for example on a bedside table. 2 Put the plug in the wall outlet. -The hour indication on the display star ts flashing to indicate that you have to set the clock time (Fig. 6). setting the clock time You cannot use the Wake-up Light until you have set the clock time. 1 When the hour indication on the display flashes, press the menu + or – button to set the hour. Note:You can only do this when you are in the set clock menu and when the hour indication flashes. If this is not the case, press the MENU button, use the menu + or – button to select the set clock menu and press the SELECT button to confirm.You are now in the set clock menu. 2 ,3 4 Press the SELECT button to confirm. The minute indication starts flashing (Fig. 7). Press the menu + or – button to set the minutes. Press the SELECT button to confirm. The appliance leaves the menu and the display shows the set clock time. , The appliance is now ready for use. Note: Every time you remove the plug from the wall outlet for more than approximately 15 minutes, you have to set the clock time again.To change the set clock time when the plug is still in the wall outlet, see section ‘Menu functions’ in chapter ‘Using the appliance’. Using the appliance Use this appliance for its intended household use as described in this manual. Menu functions Below find a description of all functions that can be set in the menu.These functions appear in the menu in the following order : -Clock time -Alarm time 1 -Alarm time 2 -Alarm sound -Dusk simulation -Display brightness You can set the menu functions in the following way: 1 Press the MENU button to enter the menu (Fig. 8). Press the menu -or + button to select a function (Fig. 9). Press the SELECT button to enter this function (Fig. 10). Press the menu -or + button to change a setting (Fig. 9). Press the SELECT button to confirm (Fig. 10). setting the alarm setting the alarm time 12 EnglisH Note: If you do not press any button within 30 seconds, the appliance exits the menu and the display shows the clock time again. 2 3 4 5 When you set the alarm, you set an alarm time and light intensity and you choose the type of sound you want to wake up to. The alarm is set when the alarm symbol is visible on the display. The light intensity slowly increases to the selected level before the set alarm time. At the set alarm time, the alarm sound slowly increases in 90 seconds to the selected level. Note:You can set two different alarm times, for example if you want to wake up at a different time on the weekend than on weekdays. Note:The volume you set for the alarm is also used as the volume for the radio and music on your USB stick.To set the alarm volume, press the volume increase or decrease button. If you do not want to wake up to the lamp or to a sound, select a light intensity or volume level of 0. See sections ‘Using the appliance as a bedside lamp’ and ‘Setting the volume’ in this chapter. 1 Push the control lever to the middle position if you want to set alarm 1. Push the control lever to the top position if you want to set alarm 2 (Fig. 11). The hour indication of the alarm time starts flashing (Fig. 12). , To adjust the time, follow steps 2 to 5. , 2 Press the menu -or + buttons to set the hour (Fig. 9). Note:You can only do this when the hour indication flashes. If this is not the case, push the control lever down and up again to enter the alarm time function.You can also set the alarm time in the menu (see section ‘Menu functions’ in this chapter). 3 Press the SELECT button to confirm (Fig. 10). The...
Эта инструкция также подходит к моделям:Прочие персональные приборы - HF3485/01 (1.39 mb)