Оценок - 5, средний балл: 5
(
)
)
|
Фрагмент инструкции
salt Ibs. 13,890 2.7 lbs. 13,890 2.7 lbs. 21,680 4.2 lbs. 13,890 2.7 Ibs, — -- 13,890 2.7 lbs. #3 SALT SETTING Backwash 1 (minutes) 1 1 1tt 1 2tt 7 7 7 Brine rinse (minutes) 30 30 47 38 30 30 30 30 Backwash 2 (minutes) 3 3 3 3 2 2 2 2 Capacity 0. salt lbs. 28,730 6.2lbs. 28,730 6.2 lbs. 44,840 9.6Ibs. 28,730 8.5Ibs. 28,730 6.2lbs. 28,730 6.2lbs. 28,730 6.2Ibs. 28,730 6.2 Ibs. #4 SALT SETTING Backwash 1 (minutes) 1 1 Itt 1 4tt 7 7 7 Brine rinse (minutes) 45 45 60 52 45 45 45 45 Backwash 2 (minutes) 3 3 3 3 2 2 2 2 Capacity LDsalt Ibs. 35,000 9.3 Ibs. 35,000 9.3Ibs. 55,090 14.4 Ibs. 35,000 10.7 Ibs. 35,000 9.3lbs. 35,000 9.3Ibs. 35,000 9.3lbs. 35,000 9.3Ibs. *Municipally supplied chlorinated water only. **Must have a minimum of 2 ppm iron and a minimum of 200 ppm TDS. See Engineering Specifications. ***Unit has no backwash flow control button or retainer. Must have a minimum of 7 gpm@30 psi available for proper backwash. ****Calcite will add additional hardness to water before softening. 'If iron is present in water supply, use salt setting #3 or #4. ttlf iron is present in the water supply, set #1 backwash to 7 minutes. 14 Mode II Setting Chart 60 SERIES 63MAQ 63BEQ * 63MXQ 63MDQ ** 62AMQ 62APQ ** .*** 62AKQ ** 62AJQ **** Mode 2 YES YES YES NO YES NO NO YES Capacity As As As -- As — — As required required required required required 96 hour regeneration(If YES OR YES OR YES OR YES OR — — YES OR Iron present – yes)• NO NO NO NO NO #1 SALT SETTING Backwash 1 (minutes) 1 1 1• — 2• -- '– -` Brine rinse (minutes) 7 7 7 — 7 — -- -- Backwash 2 (minutes) 3 3 3 -- 2 — –' — Capacity fa. salt lbs. 5,850 1 lb. 5,850 1 lb. 9,360 1.6 lb. — 5,850 1 lb. — — — #2 SALT SETTING Backwash1(minutes) 1 1 1• — 2 • — — 7 • Brine rinse (minutes) 12 12 19 — 12 12 Backwash 2 (minutes) 3 3 3 — 2 — -- 2 Capacity salt tbs. 13,890 2.7 lbs. 13,890 2.7 lbs. 21,680 4.2 lbs. — 13,890 2.7 lbs. — — 13,890 2.7 lbs. #3 SALT SETTING Backwash1(minutes) 1 1 Itt — 2tt — — 7 Brine rinse (minutes) 30 30 47 — 30 — — 30 Backwash 2 (minutes) 3 3 3 — 2 — -- 2 Capacity (salt lbs. 28,730 6.2 lbs. 28,730 6.2 lbs. 44,840 9.6 lbs. — 28,730 6.2 lbs. — — 28,730 lbs. #4 SALT SETTING Backwash 1 (minutes) 1 1 It t — 4tt -- — 7 Brine rinse (minutes) 45 45 60 45 — — 45 Backwash 2 (minutes) 3 3 3 — 2 -- --' 2 Capacity (aasalt tbs. 35,300 9.3lbs. 35,300 9.3 lbs. 55,090 14.4 lbs. — 35,300 9.3 lbs. — — 35,300 9.3 lbs. *Municipally supplied chlorinated water only. **NA, see Mode 1 Setting Chart. ***Unit has no backwash flow control button or retainer. Must have a minimum of 7 gpm@30 psi available for proper backwash. ****Calcite will add additional hardness to water before softening. *If iron is present in water supply, use salt setting #3 or #4. ttlf iron is present in the water supply, set #1 backwash to 7 minutes. 15 WaterMax Filters 61 AAN 61 AAE -BWO 61 AAR -BWO 61 AAS -BWO 61 AAF -BWO 10,000 N/A N/A N/A N/A 5 N/A N/A N/A N/A 20 N/A N/A N/A N/A 7 N/A N/A 5' N/A Manganese Greensand Activated Carbon Filter Ag Calcite/Corsex multi-Grade 1.25 1 1.25 1.25 1 6 6 6 6 6 10 10 10 10 12 7 5 5 7 7 .5 N/A N/A N/A N/A 30-120 30-120 30-120 30-120 30-120 1 1 1 1 1 5 7 7 7 7 45 0 0 0 0 3 0 0 0 0 3 0 0 0 0 4 oz. KMnO4 N/A N/A N/A N/A 16.7 GPM 21.4 GPM 21.5 GPM 20.4 GPM 19.4 GPM 10.5 GPM 15.9 GPM 15.9 GPM 15.2 GPM 15.1 GPM 4.5 GPM @ 4.7 PSI 3.6 GPM @ 1.1 PSI 4.5 GPM @ 1.5 PSI 4.5 GPM @ 1.8 PSI 3.6 GPM @ 1.5 PSI Removes iron Removes Removes Willraise the Removes and ironalgae. tastes, odors suspended pH of most low suspended Also removes and will reduce matter pH water. The matter up to 5 ppm most man- (turbidity) from mineral media (turbidity) from Hydrogen made water down to must be water down to Sulfide with pollutants. the 20-40 replenished nominal 20 the presence Backwash micron range. periodically to microns. of 2 ppm iron. every 3days Backwash maintain Backwash Regenerate orasneeded. every 3 days optimum bed every 3days every 6 days orasneeded. depth for or as needed. for iron; as WARNING! effective needed for Must not Must not be backwash ed correction. Hydrogen Backwash Sulfide for 24 hours every 2 days to (sulfur), after prevent installation. solidification of 1The 61AAS-BWO will raise the pH of most, but not all low pH water. Some water requireschemical injection using a chemical feed pump. 2CAUTION: follow the instructions on the KMnO4 container. 3For optimum water quality, do not exceed recommended service flow rate for filter media type. WaterMax Filters Application Chart Capacity (ppm) Sulphur H2S(2 ppm) Iron (ppm) Minimum pH Media type Media amount (cu. ft.) Cont. flow rate (gpm) Peak flow rate (gpm) Backwash rate (gpm) Brine line flow control (gpm) Water pressure Mode settings Backwash #1 (min) Brine/rinse (min) Backwash #2 (min) Salt (lbs. 3 b. a It setting=4oz. KMnO42 Regenerant used Flow rate at 25 PSI drop Flow rate at 15 PSI drop Recommended service flow3@ pressure drop 16 Troubleshooting ProblemCauseSolution Add salt. Remove the brine line and flushclean. Clean air ...
Эта инструкция также подходит к моделям:Прочие персональные приборы - 63MAQ (945.95 kb)