Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
NOTICE! The software contained in this device is copyrighted by Ericsson Inc. Unpublished rights are reserved under the copyright laws of the United States. This manual is published by Ericsson Inc., without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Ericsson Inc., at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of Ericsson Inc. Copyright © January 1990, Ericsson GE Mobile Communications Inc. TABLE OF CONTENTS (CONT.) TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . 5 CONTROLS . . . . . . . . . . . . . . . . . 5 INDICATORS . . . . . . . . . . . . . . . . 13 UNIVERSAL DEVICE CONNECTOR . . . . 14 ALERT TONES . . . . . . . . . . . . . . . 15 OPERATION . . . . . . . . . . . . . . . . 15 POWER-UP . . . . . . . . . . . . . . . 15 MODE/CHANNEL/CG SELECTION . . 16 RECEIVING A MESSAGE . . . . . . . 17 TRANSMITTING A MESSAGE . . . . . 18 EMERGENCY OPERATION . . . . . . 18 SCANNING CHANNELS . . . . . . . . 19 TELEPHONE INTERCONNECT CALLS . . . . . . . . . . . . . . . . . 22 "KEY LOCK" MENU . . . . . . . . . . 24 "ALERT" MENU . . . . . . . . . . . . . 25 PROGRAMMABLE FEATURES . . . . . . 25 OPERATING TIPS . . . . . . . . . . . . . 27 OPERATING RULES AND REGULATIONS . . . . . . . . . . . . . . . 27 BATTERY PACKS . . . . . . . . . . . . . . 28 INSTALLING THE BATTERY PACK . . . 28 REMOVING THE BATTERY PACK . . . 29 CHARGING THE BATTERY PACKS . . 29 RECHARGEABLE BATTERY PACK DISPOSAL . . . . . . . . . . . . . . . 30 SWIVEL MOUNT REMOVAL AND REPLACEMENT . . . . . . . . . . . . . . 30 INTRINSICALLY SAFE USAGE . . . . . . . 31 WARRANTY . . . . . . . . . . . . . . . . 33 NICKEL-CADMIUM BATTERY WARRANTY . . . . . . . . . . . . . . . . 34 PRODUCT SPECIFICATION FOR CE MARKED EQUIPMENT The M-PA Portable conforms to the following Product Specifications. EUROPEAN STANDARDS: Safety: Not Applicable EMC: prETS 300 279 (August 1995) TTD: Not Applicable SUPPLEMENTARY INFORMATION: At this time, the M-PA portable radio may not be operated while in a vehicular charger in the European Community since it has not been evaluated for operation in this mode. This M-PA portable radio may be used in both trunked and conventional applications. INTRODUCTION CONTROLS This manual describes the operation of the M-PA O two-way FM Select, Scan, and System model portable radios. Operating controls on the radio include a rotatable control knob, rotatable volume control, a 4button keypad (Scan model) or 16-button keypad (System model), push-to-talk, emergency and monitor buttons. The on/off power switch for the unit is located on the removable battery pack. The 8-digit alphanumeric liquid crystal display (LCD) on the front of the radio displays the operating status of the radio. This backlit display also has status flags for indicating the various operating conditions such as transmitter on, scanning, or emergency mode enabled. The exact operation of your radio will vary depending upon the mode of operation, the radio’s programming, and the particular radio system. Consult your radio system’s representative for particular features that are programmed into your radio. ON/OFF SWITCH The ON/OFF SWITCH is located on the battery pack. Sliding this switch up will supply power to the radio from the battery pack. An audible click will be heard and the "ON" indicator will be exposed. When the radio is turned on, it will perform a power-up self test and then resume operation on the previous operating channel as displayed in the LCD. Sliding the switch down will turn the radio off. VOLUME CONTROL KNOB The VOLUME CONTROL KNOB is a rotatable control on the top of the radio used to adjust the receiver’s audio level in the speaker. Rotating this knob in a clockwise direction will increase the audio level. Counter-clockwise rotation will decrease the audio level. Minimum levels may be programmed into the radio to prevent missed calls due to too low of a volume setting. CONTROL KNOB The rotatable 16-position CONTROL KNOB located on the top of the radio is programmed to select the operating channel, mode, or specific Channel Guard encode/decode tones. See MODE/CHANNEL/ CG SELECTION for details. A stop plate may be installed under the knob to limit the maximum number of positions to less than sixteen (16). It is normally factory installed for fifteen (15) positions. Some radios may be programmed with this knob disabled. PTT BUTTON Pressing the PTT BUTTON on the side of the radio will enable the radio’s transmitter. The "TX" status flag in the display will turn on when the radio is transmitting. Releasing the PTT BUTTON will return operation to receive mode. MONITOR BUTTO...