Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Night Muting To mute your timer during your sleep, hold down MUTE until the aappears on the display. If the times you set are between 11 p. m. and 7 a. m. , all the timers will alarm at 7 a. m. To turn mute off, hold down MUTE until the icon disappears. Resetting the Timer To reset the timer, use a straightened object to press the Reset hole on the back of the timer. All segments will appear on the display. Locking the Buttons You can lock the buttons on the timer to protect your settings. Press and hold MODE until the timer beeps and a appears on the display. To unlock the timer, press and hold MODE again until the icon disappears. Using the Pill Box Use the pill slots to store your daily medication. The label on the back can be used for recording your name, emergency contact and medical information. Specifications Power Source. ........ ........ ........ ........ ........ ........ Two AAA Batteries Operating Temperature... ........ ........ ........ ........ ........ . 32oF to 122oF Alarm Frequency .... ........ ........ ........ ........ ........ ........ ........ ..... 1 KHz Battery Life .... ........ ........ ........ ........ ...... One Year (approximately) ONOTEO• When the timer counts down to zero, the alarm sound for about 30 seconds, while the corresponding timer number flashes. Then, the timer will beep every 15 minutes, while the e flashes on the display. To silence the alarm and repeat the countdown again, SS/ CLEAR once. • To stop the alarm, press SS/ CLEAR twice. Reset hole This label is for your medical information Your Pill Box Timer is the ideal item for helping you stay on track when taking your medication. You can rely on the Pill Box Timer to remind you when it’s time to take the next dosage and keep track of the amount you’ve taken. . Setting the Countdown Timer 1. Repeatedly press MODE to enter the timer mode. The timer has four modes. In each mode, 1, 2, 3 or 4 appears. 2. Hold down SET to enter the setting mode. Repeatedly press HR/UP or MIN/ DOWN to set the timer. 3. Press SET to confirm your setting. • You can set the timer up to 24 hours. • You can hold down SS/CLEAR to clear your setting in the timer mode. Using the Timer You can use the timers separately or at the same time. 1. To start or stop the timers separately, repeatedly press SS/CLEAR after you set the first timer. The timer begins running with the coordinating timer mode in the bottom of the display. 2. To start or stop several timers, repeatedly press SS/ CLEAR after you set all four timers. MODE/LOCK MIN/DOWN HR/UP MUTE SET SS/ CLEAR Pill Slots Other Pill Box Timer Features Care & Maintenance Using the “See Doctor” Alarm Countdown Timer Installing the Batteries Setting the Time Pill Box Timer 63-1516 1. Repeatedly press MODE until time mode appears. 2. Press and hold down SET to enter the setting mode. 12HRor 24HR appears. 3. Press HR/ UP or MIN/ DOWN to select the 12-hour or 24-hour time mode and press SET. The time flashes. 4. Press HR/ UP to change the hour and MIN/ DOWN to change the minute, and then press SET. The year flashes. 5. Repeat Step 4 to set the year. The month and date flashes. 6. Repeatedly press HR/UP or MIN/ DOWN to select the date format: 2M 1Dor 1D 2M. 7. Repeatedly press HR/UP or MIN/ DOWN to select the month and press SET. The date flashes. 8. Repeat Step 7 to set the date. If you select 12HR, PM will appear in the time mode when you go past 12. Note: If you do not select a button for about 30 seconds, the timer will return to time mode. You can set this alarm to remind you of an upcoming doctor’s appointment. 1. Repeatedly press MODE until - - - - SDA appears on the display. 2. Press and hold SET until the year flashes. Press HR/ UP or MIN/ DOWN to select the year and press SET. The month and date appear, while the month flashes. 3. Repeatedly press HR/ UP or MIN/DOWN to select the month, and then press SET. The date flashes. Press HR/UP or MIN/ DOWN to select the date. 4. Press SET after you finish. The remaining number of days until the date of your appointment and SDA appear on the display. Then, SDA appears on the display of the time mode. • The timer will alarm at 9 a. m. for about 30 seconds until you press any button and SDA flashes continuously in the display. • You can press S/ S CLEAR to clear your alarm setting in the setting mode. The maximum length of time you can set for the countdown is two years. Notes: • If you do not press a button for about 30 seconds, the timer will return to timemode. The new setting will not be saved. • If your appointment is today’s date, set the alarm before 9 a.m. Otherwise, the See Doctor Alarm will not enable. • Keep the timer dry. If it gets wet, wipe it dry immediately. • Use and store it in room temperature environments only. • Handle the product carefully. Do not drop it. • Keep the timer away from dust and dirt. Wipe it with a damp cloth occassionally to keep it looking new. • Modifying or tampering with the timer’s internal components can cause...