Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
4. Installation Instruction
Please fol ow the reference sections in order for instal ation.
4-1 Installation of Power Supply
To facilitate the installation, it is recommended to set the chassis upright on the table.
Required parts: power supply securing screws x 4
4-1.1 Remove side panel (see step 1-3.1on page 5).
4-1.2 Place the power supply unit into the case.
4-1.3 Secure the power supply with the 4 securing screws.
4-1.4 When using large power supply unit, please disassemble the cross bar by loosening screws.
Fasten the screws to secure the cross bar after the power supply is installed.
4-1.1
4-1.2
4-1.3
4-1.4
4-2 Installation of Motherboard
This chassis supports E-ATX / CEB / ATX / Micro ATX motherboards. Please confirm the dimensions
and fixing points of the motherboard prior to installation.
Required parts: Copper stand offs, Motherboard screws and screw driver
4-2.1 According to the motherboard’s specifications, select the proper screw points. Screw in the
copper stand offs into the corresponding points on the motherboard.
4-2.2 Change the motherboard I/O bracket on the rear panel (supplied by the motherboard
manufacturer).
4-2.3 Secure the motherboard with the motherboard
Motherboard
Code on tray
Securing screw
Copper stand of
E-ATX
E1-E12
11
11
screws (refer to your motherboard manual to
CEB
E1-E8
8
8
check what type of motherboard you have).
ATX
A1-A9
9
9
Micro ATX
U1-U9
9
9
4-2.1
4-2.2
4-2.3
4-3 Installation of Add-On card
This chassis supports tool-free installation of add-on cards (10.5" length or lower.), e.g. graphics
cards, sound cards, and etc.
Required Tools: None
4-3.1 Unlock the PCI slot clamp.
4-3.2 Remove the internally attached PCI slot blanking plate.
4-3.3 Insert the add-on card into the expansion slot with care.
4-3.4 Secure the PCI clamp.
4-3.1
4-3.2
4-3.3
4-3.4
08
English
...