Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Gigabyte, модель Triton

Производитель: Gigabyte
Размер: 7.97 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


4-3.3 Insert the add-on card into the expansion slot and then lock the PCI tool-free fastener. English 4-4 Installation of Front Multi-Media I/O Ports Incorrect connection of the slots can possibly cause the motherboard to malfunction or completely destroy the motherboard. Please read the installation procedure within the user manual as incorrect installations or connections causing faults will void your warranty. The front panel consists of: (1) 2 x USB, 1 x IEEE 1394 and 1 x Audio Set (HD & AC’97) (2) Basic casing power switch control cable kit. Required Tools: None Please refer to the instructions supplied by the motherboard manufacturer and make sure the correct type of connector is used prior to installation. (1) 2 x USB, 1 x IEEE 1394 and 1 x Audio Set (HD & AC’97) 4-4.1 Insert the USB 2.0 connectors into the corresponding socket on the motherboard. USB 2.0 connector Pin Definition Pin Definition 1 Power 6 USB Dy+ 2 Power 7 GND 3 USB Dx8 GND 4 USB Dy9 5 USB Dx+ 10 USB Over current 4-4.2 Insert the IEEE 1394 connector into the corresponding socket on the motherboard. IEEE 1394 connector A ABC Pin Definition Pin Definition 1 TPA+ 6 TPB 2 TPA7 3 GND 8 +12V 4 GND 9 +12V 5 TPB+ 10 GND IEEE 1394 connector B Pin Definition Pin Definition 1 TPA+ 6 TPB 2 TPA7 +12V 3 GND 8 +12V 4 GND 9 5 TPB+ 10 GND IEEE 1394 connector C Pin Definition Pin Definition 1 +12V 9 +12V 2 +12V 10 +12V 3 TPA+ 11 TPA1+ 4 TPA12 TPA15 GND 13 GND 6 GND 14 7 TPB+ 15 TPB1+ 8 TPB 16 TPB1 10 English 4-4.3 Insert the Audio connector into the corresponding socket on the motherboard. HD AUDIO Pin Definition Pin Definition 1 MIC2_L 6 FSENSE1 2 GND 7 FAUDIO_ JD 3 MIC2_R 8 4 -ACZ_DET 9 LINE2_ L 5 LINE2_ R 10 FSENSE2 AC'97 Pin Definition Pin Definition 1 MIC 6 NC 2 GND 7 NC 3 MIC Power 8 4 NC 9 Line Out(L) 5 Line Out(R) 10 NC (2) Basic casing power switch control cable kit. Follow the connectors list below for installation (see figure below) Connector Color Speaker Yellow(+) / Black(-) Reset SW Blue(+) / White(-) Power SW Orange(+) / White(-) Power LED+ Green Power LED-White H.D.D. LED Red(+) / White(-) Different motherboards have different installation areas and specifications, screw holes and connectors. For detailed instructions, please refer to the motherboard user manual supplied by the motherboard manufacturer. 4-5 Connection of Fan Power Cables This chassis has one 12cm silent cooling fan in the front and one in the rear. This case includes internal connectors that connects the front and rear fans making it into a single 3-pin connector. Required Tools: None 4-5.1 Plug the 3-pin connector into the corresponding system fan socket on the motherboard. 11 English 4-6 Installation of 5.25” Front Device Bay This chassis can accommodate up to 5 x 5.25” front devices. Required Tools: None 4-6.1 Detach the front panel (see step 1-3.2 on page 6) and remove the mesh drive rail from the front panel. 4-6.2 Remove...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории