Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
When using electrical tools, follow all precautions to reduce the risk of fire, electric shock, and other personal injury. Veuillez lire toutes les instructions et les etiquettes du produit. Lorsque vous utilisez des outils electriques, veuillez observer toutes les precautions afin de reduire les risques d’incendie, de choc electrique ou de blessures. Lea todas las instrucciones y las etiquetas de los productos. Cuando utilice herramientas electricas, observe todas las precauciones para disminuir el riesgo de incendio, descargas electricas y otras lesiones fisicas. Need help? Call us first for answers fast. Call Wagner toll-free if you have any comments or problems with this Wagner Product. Besoin d’aide? Appelez-nous pour des reponses rapidas. Telephonez a Wagner sans frais d’appel si vous avez des commentaires ou des problemes avec l’appareil. .Necesita Ayuda? Llamenos primero para obtener respuestas rapidas. Llame a la linea gratuita de Wagner si quiere hacer un comentario o tiene problemas con este producto de Wagner. 0106 • Form No. 0282720D Patent Pending WARNING SAVE THESE INSTRUCTIONS General Safety Rules Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. Work Area • Keep your work area clean and well-lit. Cluttered benches and dark areas invite accidents. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. • Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Electrical Safety • Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adaptor plugs. Check with qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user. • Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. • Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock. • When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock. Personal Safety • Stay alert, watch what your are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious injury. • Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothing, jewelry, or long hair can be caught in moving parts. Air vents may cover moving parts and should be avoided. • Avoid accidental starting. Be sure switch is turned off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. • Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. • Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat or hearing protection must be used for appropriate conditions. • Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury. • Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. English WARNINGWARNING SAVE THESE INSTRUCTIONS Tool Use and Care • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. • Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired. • Disconnect the plug from the from the power source before making any adjustments, changing accessories, or storing the tool. Such preventat...