Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
A wrench or a key that is left attached to a rotating part of the tool may result in personal injury 5. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. 6. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. TOOL USE AND CARE 1. Use clamps or other practical way to secure and support the work piece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. 2. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 3. Do not use tool if switch does not turn ON or OFF. Any tool that cannot be controlled with a switch is dangerous and must be repaired. 4. Disconnect battery pack from tool or place the switch in locked or OFF position before making any adjustments, changing accessories or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. 5. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. They should be kept away from work area. 6. When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns or a fire. 7. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control. 8. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 9. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE 1. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. 2. When servicing a tool, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury. LIST OF MAIN PARTS 1. Stand 2. Nozzle 3. Viewing window 4. Glue stick feeder tube 5. Handle 6. Trigger 7. Power Cord 4. Glue stick feeder tube 3. Viewing window 5. Handle 2. Nozzle 7. Power cord 1. Stand 6. Trigger Figure 1 TECHNICAL SPECIFICATIONS: Model Number FL-258 Rating Voltage 120Volts 60Hz Nominal power 100 Watt Cord 4.2’ CONTENTS OF PACKAGING 1. Stand 2. 8 Glue Sticks 3. Glue Gun 4. Instruction Manual If any of the above items are missing, please contact our service department at 1-888- 367-7373 (for replacement. OPERATION Glue gun can be used for wood working projects, hobby and crafts. WARNING: Glue Gun can get very hot use with caution! FOLD DOWN STAND • Attach wire stand to nose of the glue gun. • During operation the stand must be folded down to allow safe positioning between gluing. • When the gun is not in use and being stored, the stand (1) can be folded out of the way. LOADING GLUE STICK • Insert the glue stick into the gun through the feeder tube (4). • Press trigger several times until glue stick is firmly set into feeder tube. • Allow glue gun to warm up approximately 5 minutes. • To further load the stick into the gun, squeeze the trigger several times. When the glue stick is near completion, a second stick can be inserted into the feeder tube to push out the remains of the previous stick. TRIGGER • The glue sticks must be allowed to heat fully to flow properly. • To start flow of the hot glue, squeeze trigger (6). The trigger may require continuous pressure initially to begin flow. • Press glued surface together for 15 seconds. Use of clamps or other holding devices are not necessary. IMPORTANT: When finished, unplug the glue gun from outlet and allow gun to cool. No clean up is required. Do not attempt to remove unused glue sticks from the gun. Unused glue can be kept in gun and used later. Do not store glue gun until fully cooled. MAINTENANCE CLEANING • Clean glue gun, when unplugged but slightly warm, by using a citrus-based solvent cleaner sold at most grocery stores. • To get glue off fabric, chill the fabric and crack glue off. SERVICE CENTER If you have any question in regards to the operation of this power tool or are in need of a spare part please contact our service center at: Wachsmuth & Krogmann, Inc. Tel: 1-888-367-7373 (Business hours Mon-Fri 9:00am - 4:00pm CT) Website: ENVIRONMEN...