Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
If you have had no experience with machines of this kind, you should initially work under the supervision of people with previous experience. x Keep safe all documents supplied with this machine so that you can refer to them if required. Keep proof of purchase for possible warranty cases. x Should you ever lend or sell the machine, make sure that any machine documents are passed on with it. x The manufacturer bears no liability for damage caused by non-compliance with these operating instructions. 2 Specified Use The dust extractor has been tested at the testing premises of the "HOLZ" Fachausschuss (Technical Committee responsible for testing wood dust), Kalscheurer Weg 12, 50969 Koln, Germany, in accordance with testing principles GS-HO07 from the chief association of the Gewerbliche Berfusgenossenschaft e.V. (Registered German Industrial Employers’ Liability Insurance Association), Alte Heerstra.e 111, 53757 St. Augustin, Germany, technical "HOLZ" Fachausschuss. It is therefore suitable for separating wood dust, where the residual dust content level 2 "H2" of 0.2 mg/m3 is reliably observed. The dust extractor bears the mark of conformity with the corresponding supplement: The result of the dust test is based on the extraction of dry wood dust and dry wood chips with a wood moisture content < 30%. 1. Use as a dust extractor The machine can be used to extract wood dust and chips from individual wood- processing machines (also oak and beech wood dust). The diameter of the extractor connection piece on the machine can be up to 100 mm. Reduction pieces may be required and are supplied as accessories. Wood- processing machines whose extractor connection piece diameter is greater than 100 mm must not be connected to the dust extractor. 2. Use as a vacuum cleaner The machine can be used for vacuuming deposited wood dust and chips (also oak and beech wood dust) in combination with the cleaning nozzle, order no. 0913031270. When connecting an extractor hose, make sure that only electroconductive and flame- retardant hoses are used and that the electric connection between the hose and connector is correct. Only original accessories and spare parts should be used. The user bears sole responsibility for damage caused by improper use. Generally accepted accident-prevention regulations and safety instructions should be observed. 3 General information on safety Before using the dust extractor, read the operating instructions carefully all the way through. Keep safe all documents accompanying the dust extractor. For your own safety and for protection of your dust extractor, read all parts of the text marked with this symbol! x Only original accessories and spare parts should be used. x The dust extractor should only be operated by people who have been informed on how to use it and who have been given express permission to do so. x The machine should only be used for dry cleaning tasks and not outdoors. x Make sure that the power cable is not damaged by being driving over, crushed, dragged or similar. x The power cable must be inspected regularly for signs of damage or aging. x The machine should not be used if the power cable is not in perfect condition. x When replacing the power cable, only use a rubber hose line, type HO7RN-F 1,5 mm2. x Use a protective contact connector when replacing the mains plug. x The power cable and mains plug should only be replaced by personnel qualified to perform this task. x If the mains or machine power cable needs to be replaced, the type specified by the manufacturer must be used, without exception. x The plug should only be plugged in once the dust extractor has been successfully set up at the location of use; connection to alternating current protective contact mains wall socket with inert upstream 10 A fuse (SPA 2002 W).. x Disconnect the mains plug after use, prior to moving the dust extractor to another location and before cleaning, maintaining, replacing or removing movable parts. x Only use original accessories when operating the dust extractor, . x When extracting oak and beech wood dust, the filtered air should only be returned to the place that it was extracted from. This is ensured if the dust extractor is set up beside the machining equipment. x When extracting oak and beech wood dust, the volumetric flow returned by the dust extractor should amount to a maximum of 50% of the intake air. In the case of free room ventilation, an intake air flow of 1 x room volume (m3/h) should be adopted (air change quantity LW = 1/h). x Maintain sufficient air supply. x Type 1 dust-explosion protected dust extractors are technically suitable for extracting combustible dust (moist and dry) of dust-explosion classes St 1 and St 2 (Kst value < 300 bar x m x s-1) in zone ENGLISH 22 (see Elex V, § 2 (4)). They should only be used to extract surface dust. x Type 1 dust-explosion protected dust extractors are technically suitable for extracting combustible dust (moist and dry) of dust-explosion clas...