Войти:
Оценок - 4, средний балл: 3.8 ( )

Инструкция по эксплуатации Flymo, модель 3400

Производитель: Flymo
Размер: 1.99 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


4. Connect plug to mains and switch on. 5. Tilt the handle downwards to slightly raise the front of the lawnmower and to reduce the risk of lawn damage whilst starting. The switchbox is provided with a lock-off button (R1) to prevent accidental starting. 6. Press and hold the lock-off button (R) on the switchbox, then squeeze one of the Start/Stop levers towards the upper handle (S). 7. Continue to squeeze the start/stop lever towards the upper handle and release the lock-off button. 8. Lower the lawnmower to its proper operating position and commence mowing. • NOTE: There are two start/stop levers fitted. Either one can be used for starting the lawnmower. • IMPORTANT: Do not use the start/stop levers intermittently To Stop your Lawnmower 1. Release the pressure on the Start/Stop lever. When received from the Manufacturer, the front wheels are in a raised position. Do not switch on this product before removing from the raised position into a desired height of cut. (M) grassbox empty grassbox full M IMPORTANT INFORMATION Q R S 1 How to Mow 1 Start mowing the edge of the lawn nearest to the power point so the cable is laid out on the lawn you have already cut. 2 Mow twice a week during the growing season, your lawn will suffer if more than a third of its length is cut at one time and this may also result in poor collection. Do Not Overload Your Mower: Mowing long thick grass may cause the motor speed to drop, you will hear a change in the motor sound. If the motor speed drops you may overload your lawnmower which may cause damage. When mowing in long thick grass a first cut with the cutting height set higher will help reduce the load. See Cutting Height Adjustment. Removing and Fitting the Blade and Fan (T) T blade blade bolt fan pulley Always handle the blade with care - sharp edges could cause injury. USE GLOVES. Removing the Blade and Fan 1. To remove the blade bolt, hold the fan firmly and, with the spanner provided, loosen the blade bolt by turning it anti-clockwise. 2. Remove the blade bolt, blade and fan from the pulley. 3. Inspect for damage and clean as necessary. Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardless of condition. If the blade is cracked or damaged replace it with a new one. Fitting the Blade and Fan 1. Ensure the fan is located correctly. 2. Fit the blade to the fan. 3 Re-assemble blade bolt through blade and fan. 4. Hold the fan and tighten blade bolt firmly with the spanner provided. Do not over tighten. V1 V2 V3 V4 Storing your cable in the Easi-Reel cable winder 1. Insert the female connector into the centre of the cable winder (V1) 2. Place the cable under the cable guide (V2) 3. Turn the cable winder (V3) until all of the cable is wound in.(V4) Warning:- When cable is fully wound, lid becomes heavy - Roller Compact 4000 only. Unwinding the cable before re-use 1. Pull the cable by the plug and unwind the cable fully. • Ensure that the cable is released from the cable guide (V2) before using your machine. • Ensure cable is not entangled with any other cables and that it is not trapped in any parts of the product. Easi-Reel Cable Winder (Roller Compact 3400/4000 only) Roller Compact 3400 Roller Compact 4000 V1 V2 V3 V4 Caring for your Lawmower Cleaning (W) W • USE GLOVES • IMPORTANT: It is very important that you keep your lawnmower clean. Grass clippings left in any of the air intakes or under the deck could become a potential fire hazard. • IMPORTANT Never use water for cleaning your lawnmower. Do not clean with chemicals, including petrol, or solvents - some can destroy critical plastic parts. 1. Remove grass from under the deck with the spanne/scraper tool 2. Remove the blade, see Figure T, to gain access to the fan and clean with a soft brush. 3. Raise the roller to its highest position, see Cutting Height Adjustment, and clean with a soft brush. 4. Remove grass clippings from: all air intakes, wheels, height adjustment lever and grassbox with a soft brush. 5. Clean the grassbox lid and the inside of the window with a soft brush. 6. Thoroughly clean around the cut-out switch with a soft brush 7. Wipe over the surface of your lawnmower with a dry cloth. Cleaning Easi-Reel cable winder (Roller Compact 3400/4000 only) • Roller Compact 3400 - At the back of the cable winder, squeeze together the two catches (X) and remove the cable spool. • Roller Compact 4000 - Lift grassbox lid, squeeze together the two catches (Y) and remove the cable spool. 2. Clean the cable spool and the area it was located with a soft brush (Z) 3. Replace the cable spool, ensuring it clicks into place. At the End of the Mowing Season 1. Replace blade, bolts, nuts or screws, if necessary. 2. Clean your lawnmower thoroughly. 3. Ask your local Service Centre to clean the air filter thoroughly and carry out any service or repairs required. 4. Make sure that the electric cable is wound properly. Storing the lawnmower The handles can be folded to take up the minimum of spa...

Эта инструкция также подходит к моделям:
Прочие инструменты - 340 (1.99 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории