Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
218380 218385 218381 218386 218394 218382 218383 Length L m 2 x 2 = 4 2 x 2.5 = 5 2 x 2.5 = 5 2 x 3 = 6 2 x 3 = 6 2 x 3 = 6 2 x 3 = 6 Diameter D1/D2 mm 40/48 40/48 40/48 40/48 40/48 48/60 48/60 Cable entry points 3 -3 -3 5 5 Grade (steel) St. 52 St. 37 St. 52 St. 37 St. 52 St. 52 St. 52 Wall thickness in clamping range mm 2.5 2 2.5 2 2.5 2.5 4.5 Perm. bending moment .), useful length at 800 N/m. 5.0 m 4.0 m 3.0 m - - 1,170 - 500 540 - 1,040 1,080 320 430 - 850 960 - 1,150 1,280 - 1,950 (1,150) 2,120 (1,280) - Perm. bending moment .), useful length at 1,100 N/m. 5.0 m 4.0 m 3.0 m - - 1,110 - 390 480 - 920 1,000 160 300 - 700 840 - 900 1,080 - 1,700 (900) 1,960 (1,080) - Packing unit/weight pc./kg 1/11.4 1/11.3 1 (25)/14.2 1 (25)/13.1 1 (25)/17.8 1 (25)/20.5 1/35.0 .) The max. perm. bending moment at the fixing point applies to the useful length. The windload of the mast has already been considered. According to EN 60728-11 the mast clamping range must be at least 1/6 of the mast length .) The technical data are based on DIN 4131. If the calculated bending moment exceeds the values given in brackets (= 1,650 Nm on the clamping point), static proof is required, acc. to EN 60728-11. 935.434/C/Subject to Internet: KATHREIN-Werke KG • Anton-Kathrein-Stra.e 1 - 3 • Postfach 10 04 44 • 83004 Rosenheim • Deutschland • Telefon 08031 184-0 • Fax 08031 184-306 ...
Эта инструкция также подходит к моделям:Прочие инструменты - AV 06 211450 (1.19 mb)
Прочие инструменты - AV 09 211453 (1.19 mb)
Прочие инструменты - AV 11 211463 (1.19 mb)