Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
require two CR123 3-volt Lithium Batteries. 3-watt models with the LUXEON® III LED (10-0100, 10-0200, and 10-0300) If batteries are not inserted Insert battery positive end first and Insert both batteries positive end first and replace end cap. correctly, the unit will not light. 1-watt models (10-0090) using a LUXEON® I LED only require one CR123 3-volt lithium battery. replace end cap. 3-WaTT LED OPERaTION (Models 10-0100, 10-0200, 10-0300) To power the light on, first depress the power switch located on the end cap. This will activate the translucent . Next, simply rotate the fluted head clockwise. The rotating head provides multiple performance light settings. 3-WaTT MODELS – PERFORMaNCE LIghT SETTINgS Position 1 = Brightest Light Output Position 2 = Medium Light Output Position 3 = Low Light Output Position 4 = S.O.S. Position 5 = Safety Strobe Position 6 = OFF 3 3/24/06 11:55:40 AM SECURE OFF MODE (prevents accidental On/Off) The flashlight can be stored in the fully off mode with the fluted head in the off position and the power switch deactivated. This prevents the flashlight from getting powered on accidentally. As long as the fluted head has not been rotated while off, the flashlight will return to the Light Setting last used each time the power switch is depressed. FIND-ME™ FEaTURE aND BaTTERy LIFE INDICaTOR (Glowing WARNING: Because the 3-Watt LED Flashlight (models 10-0100, 10-0200, 10-0300) is a high light output flashlight, it can reach high temperatures. Keep away from children. Use Caution when handling. button is Red, the battery life will provide approximately another 20 minutes before needing to be changed out with fresh batteries. Button on end cap) The glowing button is a multi-functional feature serving as a Find-Me™ feature and Battery Life Indicator. Find-Me™ feature is especially handy for locating the flashlight in a dark area (i.e. tent, back-pack etc). Battery Life Indicator - When the button is Green, the battery life is sufficient for operation. When the Once you are finished using the light, simply depress the power switch located on the end cap. 1-WaTT LED OPERaTION (Model 10-0090) To power the light on, first depress the power switch located on the end cap. Next, simply rotate the flashlight head clockwise. The rotating head provides multiple performance light settings. 4 Flashlight 6LIM.indd 6-7 Position 1 = Brightest Light Output Position 2 = S.O.S. Position 3 = Safety Strobe 1-WaTT MODELS – PERFORMaNCE LIghT SETTINgS Once you are finished using the light, simply depress the power switch located on the end cap. As long as the fluted head has not been rotated while off, the flashlight will return to the Light Setting last used each time the power switch is depressed. LUXEON®, and the logo are trademarks of Lumileds Lighting. MaINTENaNCE Gently blow away any dust or debris on the lens (or use a soft lens brush). To remove dirt or fingerprints, clean with a soft cotton cloth, rubbing in a circular motion. Use of a...
Эта инструкция также подходит к моделям:Прочие инструменты - 10-0090 (1013.33 kb)
Прочие инструменты - 10-0100 (1013.33 kb)
Прочие инструменты - 10-0300 (1013.33 kb)