Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
Workplace safety .....................................................................................................Page 7 2. Electrical safety.........................................................................................................Page 7 3. Personal safety..........................................................................................................Page 7 4. Careful handling and use of electrical power tools ...............................................Page 8 Operation Before first use ...............................................................................................................Page 8 Preparing the tool for use .............................................................................................Page 8 Maintenance and Cleaning ........................................................................Page 9 Service .........................................................................................................................Page 9 Warranty ...................................................................................................................Page 9 Disposal ......................................................................................................................Page 10 Declaration of Conformity / Manufacturer ...................................Page 10 GB/IE/CY Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! For indoor use only! V~ Volt (AC) Risk of loss of life by electric shock from damaged mains lead or mains plug! W Watts (Effective power) Danger of burns from nozzle or glue (up to 200 °C)! Safety class II Cordless working Observe caution and safety notes! Wear protective gloves! Keep children away from electrical devices! Dispose packaging and appliance in an environmentally-friendly way! Hot glue gun PHKP 500 SE Introduction You must familiarise yourself with all safety instructions and functions of the machine before starting it up. Further details can be found in the operating instructions. Keep these instructions in a safe place. If you pass the tool on to anyone else, please ensure that you also pass on all the documentation. Proper use The device is intended for gluing wood, cardboard, packaging, PVC, carpet, seals, plastic, leather, ceramic, glass and textiles with hot-melt adhesive. The material to be glued must be clean, dry and free of grease. Any other use or modification to the tool shall be considered as improper use and could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from improper use. The tool is not intended for commercial use. Features 1 Feed channel 234 56789 10 11 Mains lead Included items 1 Hot glue gun PHKP 500 SE 1 Charger with stand 1 Mains lead 1 Wire stand 1 Replacement nozzle (short) 1 Interchangeable nozzle (long) 6 Glue sticks 1 Carry case 1 Operating instructions Check indicator Charger connection Charger with stand Feed clamp Wire stand Drip tray Nozzle Nozzle heat shield Glue gun connection GB/IE/CY Introduction / Safety notes Technical details Nominal voltage: 230 V~ 50 Hz Nominal power: approx. 40 W (500 W) Heating up time: approx. 4 min. Protection class: II / Safety notes . ATTENTION! Please read all the instructions and advice. Failure to observe the instructions and advice given below may result in electric shock, fire and / or serious injury. KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE! 1. Workplace safety a) Keep your working area clean and clutter-free. Untidy or poorly lit working areas can lead to accidents. b) Do not allow the device to become wet. Do not operate it in a moist environment. c) Keep children and other people away while you are operating the electrical tool. Distractions can cause you to lose control of the device. . Children or persons who lack the knowledge or experience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or instruction by a person responsible for their safety. Children must never be allowed to play with the device. . ATTENTION! This tool must be placed down on its wire stand 6 when it is not being used. 2. Electrical safety a) The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock. b) Avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an increased risk of electric shock if your body is earthed. c) Keep the device away from rain or moisture. Water entering an electrical device in creases the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g. to carry the device, to hang up t...