Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
A tool or spanner left attached to a rotating part of a device can lead to injury. e) Avoid placing your body in an unnatural position. Keep proper footing and balance at all times. By doing this you will be in a better position to control the device in unforeseen circumstances. GB/IE General safety advice for electrical power tools f) Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of moving parts. Loose clothing, jewellery or long hair can become trapped in moving parts. g) If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust. 4. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. b) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. c) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. d) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. e) Look after the device carefully. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. f) Keep cutting tools clean and sharp. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. g) Use the electrical power tool, accessories, inserted tools etc. in accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Device-specific safety instructions for small drill KH3037 and mains adapter KH3037-1 When you use the drill / grinder wear the following protective equipment: safety glasses and protective gloves. CAUTION! The tool continues to rotate after it has been switched off! Avoid contact with rapidly rotating drill / grinder components. workpiece. Use clamps or a vice to grip the workpiece firmly. This is much safer than holding it in your hand. WARNING! Securely support the self by placing your hands near or in front of the device or the workpiece surface. A slip can result in injury. WARNING! Never support your- . Avoid contact with moving sanding or grinding tools. DANGER OF FIRE FROM FLYING SPARKS! Abrading metal creates flying sparks. For this reason, always make sure that nobody is placed in any danger and that there are no inflammable materials near the working area. harmful / noxious dusts generated from machining represent a risk to the health of the person WARNING! DUST HAZARD! Any GB/IE General safety advice for electrical power tools / Operation operating the device and to anyone near the work area. Wear a dust mask! Ensure that there is adequate ventilation when machining surfaces containing plastic or covered with paint, varnish etc. WARNING! NOXIOUS FUMES! . Do not soak the materials or the surface you are about to work on with liquids containing solvents. . Avoid abrading paints containing lead or other substances hazardous to health. . Do not machine materials containing asbestos. Asbestos is a known carcinogen. . Do not machine moist materials or damp surfaces. NOTE! Do not allow the tool to come to a standstill by overloading it! and allow it to come to a standstill before you put it down. WARNING! Switch the device off WARNING! Always keep the device clean, dry and free of oil or grease. . Children or persons who lack the knowledge or experience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or instruction by a person responsible for their safety. Children must never be allowed to play with the device. Operation . Never use the device for a purpose for which it was not intended or with non-original parts / accessories. The use of tools or accessories other than those recommended in the operating instructions could lead to you suffering an injury. GB/IE . Inserting or replacing a tool / co...