Производитель: Makita
Размер: 708.72 kb
Название файла: 410.pdf
|
Фрагмент инструкции
ft./min.) of water (1 1-114''x 11.114" x 11") 120.4Ibs) ~ * Manufacturer reserves the right to change specifications without notice * Note: Specifications may differ from country to country. IMPORTANT SAFETY INSTRUCTIONS Wh n sing an electrical appliance, basic precaution sha rld always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING-TO reduce the risk of fire, electric shock, or injury: 1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. 2. Electric shock could occur if used on wet surfaces. Do not expose to rain. Store indoors. 3.Do not allow to be used as a toy. Close attention is necessary when used by or near children. 4. Use only as described in this manual. Use only manufacturer's recom- mended attachments. 5. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center. 6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces. 7. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 8. Do not handle plug or appliance with wet hands. 9. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. 10. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. 11. This tool is for collecting dust or shavings exhausted from wood shop tools. Do not attempt to cdlect wood chips, metal, rocks, string, liquids or the like. 12. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. 13. Turn off all controls before unplugging. 14. Use extra care when cleaning on stairs. 15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present. 16. EXTENSION CORDS: Use only three-wire extension cords which have three- prong grounding-type plugs and three-pole receptacles which accept the tool's plug. Replace or repair damaged or worn cord immediately. 17. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords intended for use outdoors and so marked. 18. Connect to a properly grounded outlet only. See Grounding Instructions. 19. AVOID UNINTENTIONAL STARTING. Be sure switch is OFF when plugging in. 20. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces. For example; pipes, radiators, ranges, refrigerator enclosures. VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user -as well as damage to the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less than the nameplate rating is harmful to the motor. ADDITIONAL SAFETY RULES 1. Always use protective goggles, a cap and mask when using as a blower. 2. Never point the nozzle at anyone in the vicinity when using as a blower. 3. Do not block cooling vents. These vents permit cooling of the motor. Block- age should be carefully avoided lest the motor burn out from lack of ventilation. 4. Do not fold, tug nor step on the hose. 5. Always switch off and wait for the fan to come to a complete stop before installing or removing the hose. 6. Never stick your hands into the inlet or outlet. GROUNDING INSTRUCTIONS This appliance must be grounded. If it should malfunction or breakdown, ground- ing provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment- grounding conductor and grounding plug. The plug must be plugged into an ap- propriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER-Improper connection of the equipment-grounding con- ductor can result ina risk of electric shock. The green (or green and yellow) con- ductor in the cord is the grounding wire. Never connect the grounding wire to a live terminal. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance -if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is for use on a nominal 115-volt circuit, and has a grounding plug that looks like the plug illustrated in Fig. A. A temporary adapter that looks like the adapter illustrated in Fig. Band C may be used to connect this plug to a 2-pole receptacle as shown in Fig. B if a properly grounded outtet is not available. The temporary adapter should be used only until a properly grounded outlet (Fi...