Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
22 Fig. 23 OPERATING CONTROLS & ADJUSTMENTS WARNING: FOR OPERATOR SAFETY, MAKE CERTAIN THE DUST INTAKE PORT IS COVERED WITH THE VACUUM HOSE BEFORE OPERATING THE MACHINE. THE ROTATING FAN INSIDE THE BLOWER HOUSING IS ACCESSIBLE THROUGH THE DUST INTAKE PORT AND IS HAZARDOUS. MAKE SURE INTAKE CAP COVERS THE INTAKE PORT WHEN HOSE IS REMOVED. ALWAYS WEAR PROPER APPAREL.DO NOT WEAR JEWELRY, AND KEEP FINGERS AND ALL FOREIGN OBJECTS OUT OF THE DUST INTAKE PORT.ALWAYS FOLLOW THE SAFETY RULES OF THIS MANUAL. STARTING AND STOPPING DUST COLLECTOR The ON/OFF power switch (A) Fig. 24, is located on the side of the motor. To turn the machine “ON”, move the toggle switch (B) towards the “ON” position. To turn the switch “OFF”, move the toggle switch (B) towards the “OFF” position. A B Fig. 24 LOCKING SWITCH IN THE “OFF” POSITION When the tool is not in use, the switch should be locked in the “OFF” position to prevent unauthorized use. This can be done by grasping the switch toggle (B) Fig. 25, and pulling it out of the switch (A) as shown. With the switch toggle removed, the switch will not operate. However, should the switch toggle be removed while the machine is running, the switch can be turned “OFF” once, but cannot be restarted without inserting switch toggle (B). A B Fig. 25 11 OPERATIONS This versatile dust collector is light, compact and can easily be transported to a variety of locations for use in and out of the workshop. This dust collector can be used with many different types of woodworking machinery as shown in Figs. 26, 27, and 28. This dust collector shows its versatility in the way that the intake port can be positioned to accommodate different types of wood working machinery. Fig. 26 illustrates the dust collector used in conjunction with a router. Note that the intake port is adjusted so that it will be able to collect the dust created by using the router. Fig. 26 Fig. 27 illustrates the dust collector used in conjunction with a table saw. Note that the intake port is removed from the lower tube support. The intake funnel can be clamped to a tool to provide dust collection as shown. Fig. 27 Fig. 28 illustrates the dust collector used in conjunction with a drum sander that is equipped with a dust removal port. The intake funnel can be removed and the 4" dust tube can be connected directly to the dust removal port. Fig. 28 12 TRANSPORTATION AND STORAGE 1. The dust collector features a convenient carrying handle with rubber grip (A) Fig. 29, which allows the unit to be carried easily from one job area to another. IMPORTANT: THE DUST COLLECTOR WEIGHS APPROXIMATELY 46 LBS. CARE SHOULD BE TAKEN WHEN LIFTING AND TRANSPORTING THE MACHINE. 2. In addition to the carrying handle, the machine features a storage mounting bracket (B) Fig. 30, with a hole for mounting the dust collector to a wall or wooden support (when not in use). MAINTENANCE WARNING: Before any maintenance or service is performed, be sure the dust collector is disconnected from the power source to prevent accidental starting. All maintenance other than the items recommended in this manual should be performed by an authorized Delta Service Center. 1. WARNING: Always disconnect the machine from the power source before performing any maintenance procedures. 2. The condition of the dust bag should be checked periodically for damage and emptied on a regular basis. Do not transport the machine with a full dust bag. 3. Clean and apply a dry silicone lubricant monthly to the impeller to remove any dirt or build-up of pitch, gum and wood shavings. 4. WARNING: Always make sure that the intake cap (A) Fig. 31, covers the intake port when the hose is not connected to the machine. A Fig. 29 B Fig. 30 A Fig. 31 13 ACCESSORIES A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site for a catalog or for the name of your nearest supplier. WARNING: Since accessories, other than those offered by Delta, have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product. PARTS, SERVICE OR WARRANTY ASSISTANCE All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable • Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582). Two Year Limited Warranty Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service ce...