Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
To reduce your exposure to these chemicals: Work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. Table of Contents INTRODUCTION...............................................2 Foreword........................................................2 Contact info....................................................2 Functional Overview......................................2 identification...................................................7 SECTION 1: SAFETY.......................................8 Safety instructions for Machinery..................8 Additional Safety for Power Feeders...........10 SECTION 2: CIRCUIT REQUIREMENTS......11 220V Single-Phase Operation (G1095)....... 11 220V Three-Phase Operation (G1096)........ 12 SECTION 3: SETUP.......................................13 Setup Safety................................................13 items Needed for Setup...............................13 Unpacking....................................................13 inventory......................................................14 Clean Up......................................................15 Assembly.....................................................15 Base Mounting.............................................16 Test Run......................................................18 SECTION 4: OPERATIONS...........................19 Operation Safety..........................................19 Basic Use and Care.....................................19 Changing Speeds........................................20 SECTION 5: MAINTENANCE.........................21 Schedule......................................................21 Cleaning.......................................................21 Lubrication...................................................21 SECTION 6: SERVICE...................................22 Troubleshooting...........................................22 Wheel Replacement.....................................23 SECTION 7: WIRING......................................24 Electrical Safety instructions........................24 Electrical......................................................25 SECTION 8: PARTS.......................................27 Main Power Feeder Assembly....................27 Stand and Support Assembly......................29 WARRANTY AND RETURNS........................32 Model G1095/G1096 1-HP Power Feeder -1- INTRODUCTION Foreword Functional Overview We are proud to offer the Model G1095/G1096 1 HP Power Feeder. This machine is part of a growing Grizzly family of fine woodworking machinery. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commitment to customer satisfaction. The specifications, drawings, and photographs illustrated in this manual represent the Model G1095/G1096 when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly. For your convenience, we always keep current Grizzly manuals available on our website at grizzly.com. Any updates to your machine will be reflected in these manuals as soon as they are complete. Visit our site often to check for the latest updates to this manual! Contact Info We stand behind our machines. if you have any service questions, parts requests or general questions about the machine, please call or write us at the location listed below. Grizzly industrial, inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax: (800) 438-5901 E-Mail: techsupport@grizzly.com This power feeder greatly simplifies repetitive operations on table saws, jointers, and shapers by automating how workpieces are fed into the cut. This is extremely important to woodshops that cut thousands of board feed on a regular basis. Since the power feeder is typically positioned between the blade and the operator during operations, the operator’s hands do not need to get near the blade when feeding the workpiece, so the danger of an accidental cutting injury is greatly reduced. Additionally, the power feeder provides more consistent results than hand fed operations, because it moves the workpiece at an even speed and maintains consistent workpiece pressure against the table and fence throughout the cut. The power feeder works by simply attaching rubber rollers to a motor through a series of gears designed to control the roller speed. Since the rubber rollers must be positioned correctly to maintain even workpiece pressure against the table and fence, the power feeder is mounted on a stand that allows it to be moved and locked at infinite heights, angles, or rotations within range of the stand. The power feeder stand is typically mounted to the desired machine by either clamping to the machine’s table, or mou...