Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance to instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. Specifications DC-650 Series Dust Collector Model ...................................................................................DC-650A/ARC........................................ DC-650C/CRC Stock Number ...............................................................708640/708640RC............................... 708640C/708641RC Blower Wheel Diameter........................................................................9.5”..........................................................9.5" Sound Rating at 3 feet.................................................................65-70 dB..................................................65-70 dB Hose Diameter.........................................................................................4".............................................................4" Bag Diameter.........................................................................................14”...........................................................14" Filter and Collector Bag Length .................................................31.5”/21.6”........................................................ 33.5” Collector Bag Capacity (cu ft):...............................................................2.1...........................................................2.1 Air Flow @ 4” (CFM):............................................................................650.......................................................... 650 Max. Static Pressure (inch of water):.....................................................6.5........................................................... 6.5 Velocity @ 4” (FPM):.......................................................................... 6,300....................................................... 6,300 Overall Dimensions:...........................................................26.4”x14”x56.7”.............................26-1/2” x 14” x 61-1/2” Motor (TEFC):...............................1 HP, 1Ph, 115V/230V, Prewired 115V......1 HP, 1Ph 115/230V, Prewired 115V Net Weight (lbs): ..................................................................................... 69............................................................ 84 Gross weight (lbs): .................................................................................. 74............................................................ 87 The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations. 6 Unpacking 1. Remove all contents from the shipping carton. 2. Report any damage to your distributor. 3. Do not discard any shipping material until after the dust collector has been assembled and is running properly. Contents of the Shipping Carton DC-650A Contents 1 – Base 1 – Owner's Manual 1 – Warranty Card 1 – Motor Assembly 1 – Motor Cooling Fan 1 – Collector Bag 1 – Filter Bag 4 – Casters 1 – Support Cylinder 1 – Retaining Strap 1 – Filter Bag Support Rod 1 – Bag of Assembly Hardware 4 – M6 x 12 Cap Screws 5 – M6 Lock Washers 5 – M6 Flat Washers 2 – 3/8"-16 Acorn Nuts 2 – 3/8" Hex Nuts 4 – M10 Flat Washers 4 – M8 x 12 Cap Screws 4 – M8 Flat Washers 1 – M6 Hex Nut Tools Required for Assembly 2 14mm Wrenches or Sockets 1 10mm Wrench or Socket DC-650C Contents Canister Filter Box 1 – Canister Filter 1 – Handle 1 – Bag of Hardware for Handles 2 – M10 Hex Nuts 2 – M10 Flat Washers 1 – M10 Lock Washer 4 – Knobs 1 – M8 Hex Nut 1 – M8 Flat Washer 1 – M8 Lock Washer DC-650C Box 1 – Base 1 – Owner's Manual 1 – Warranty Card 1 – Motor Assembly 1 – Motor Cooling Fan 5 – Collector Bags 1 – Snap Ring 4 – Casters 1 – Support Cylinder 1 – Bag of Assembly Hardware 4 – M6 x 12 Cap Screws 4 – M6 Lock Washers 4 – M6 Flat Washers 2 – 3/8"-16 Acorn Nuts 2 – 3/8" Hex Nuts 4 – M10 Flat Washers 4 – M8 x 12 Cap Screws 4 – M8 Flat Washers Tools Required for Assembly 2 14mm Wrenches or Sockets 1 10mm Wrench or Socket 1 17mm Wrench Read and understand the entire contents of this manual before attempting set-up or operation! Failure to comply may cause serious injury. 7 Assembly The dust collector must be disconnected from the power source during assembly. Failure to comply may result in serious injury! Motor Housing and Support Canister 1. Place the impeller housing (A, Fig. 1) on the floor with the motor (B, Fig. 1) facing upwards as shown. 2. Attach the fan (C, Fig. 1) to the motor shaft (D, Fig. 1). Allow a 1/16"-1/8" clearance between the...
Эта инструкция также подходит к моделям:Прочие инструменты - DC-650C (1.46 mb)
Прочие инструменты - DC-650ARC (1.46 mb)
Прочие инструменты - DC-650CRC (1.46 mb)