Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 Specifications Specifications Power Source Light Bulb Lens Charging Adapters Weight Features Description Battery, sealed lead-acid, 12 VDC, 7 AH Xenon, 12 V, 35 W High Intensity Discharge (HID); 3000 hour life 9 inch (dia.) with reflector Power cord: 110 VAC Car adapter: 12 VDC 12.6 lbs. LED charging status indicator; Carrying strap; Built-in charging adapter compartment; Adjustable stand Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, and parts list. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING:When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool! 1. Avoid eye damage. Do not shine light directly into the eyes of people or animals. Temporary blindness can occur. The High Intensity Discharge (HID) light bulb is three times brighter than a halogen bulb. 2. Avoid burns. Do not touch the Spotlight lens during operation. It becomes very hot. Allow the Spotlight to cool down before performing any maintenance. 3. Avoid overheating the Spotlight. Do not block the lens and reflector during operation. 4. Observe work area conditions. Do not use in damp or wet locations. Don’t expose to rain. Do not use electrically powered tools in the presence of flammable gases or liquids. 5. Keep children away. Children must never be allowed to use this Spotlight. 6. Store idle equipment. When not in use, store in a dry location to inhibit corrosion. SKU 93175 For technical questions, please call 1-800-444-3353 Page 2 7. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool.There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended. 8. Maintenance. For your safety, service and maintenance should be performed by a qualified technician as a high voltage hazard exists within the unit circuitry. Battery replacement is not hazardous, however. 9. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Do not use if any parts are broken; or any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the Spotlight if any switch does not turn On and Off properly. 10. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. Note: Performance of this Spotlight may vary depending on variations in local line voltage while charging, or Spotlight Battery power. Battery Precautions 1. Read all instructions and warnings on the Battery before charging the battery. 2. To avoid accidents, charge the supplied Battery only. Use only the attached charging adapters for charging the internal Battery. 3. Replace a dead Battery with only the same type (see Specifications, page 2). 4. Do not expose the Battery to rain or wet conditions. 5. To avoid damage of cable and plug, never pull the cable to disconnect the charging cord. 6. Do not use the charging cable if the cable or plug are damaged. 7. Repairs should be carried out by a qualified technician. 8. Do not touch the Battery poles with any conductive source. 9. Do not store the Battery in a box with other metal objects. 10. Do not throw the Battery in a fire or in the general trash. Contact your local hazardous waste disposal authority for proper disposal. SKU 93175 For technical questions, please call 1-800-444-3353 Page 3 11. Always recharge the Battery when the Spotlight performance begins to diminish. Severe heat is most destructive to a Battery; the more heat generated, the faster the Battery loses power. A Battery that gets too hot can be permanently damaged. Never over-discharge a Battery by using the tool even after tool performance is decreasing.When tool performance begins to diminish, stop the tool, and recharge the Battery. 12. Always remove the Battery from the Spotlight before performing inspection, maintenance, cleaning procedures, or storage. Warning:The warnings, cautions, and instructions discussed in th...