Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
When installing and assembling your spa wrap, it is recommended that two or more people be involved. Do not use the unit during an electrical storm. Do not attempt any repair without consulting the manufacturer first. Unauthorized repairs will void the manufacturer’s warranty (within the first 90 days). Delivery and Set-Up . 1 Planning the Best Location for Your Spa Wrap . 1 Preparing a Good Foundation 1 Spa Wrap Assembly 2 Tools and Materials 2 Assembly . 2 Seam and Joint Finishing . 5 Installing Your Spa Wrap Fireplace 7 LP Gas Requirements . 7 Natural Gas Requirements . 8 What To Do If You Smell Gas . 8 Testing for Leaks 9 Lighting Your Gas Fireplace . 9 To Turn Off the Appliance 9 Safety Information . 10 Maintenance and Care 12 Maintaining Your Fireplace 12 Cleaning 12 Replacement Parts . 13 Warranty Information 14 Copyright 2008-2009 LMS, Inc. All rights reserved. Duplication without written consent is strictly prohibited. Cal Spas™ and Cal Enclosures™ are registered trademarks. Due to continuous improvement programs, all models, operation, and/or specifications are subject to change without prior notice. LTR20091032, Rev. A 12/16/08 CONTACT INFORMATION For customer service, please contact your authorized dealer immediately. If you need additional information and/ or assistance, please contact: LMS Customer Service Department 1462 East Ninth Street Pomona, CA 91766. Toll Free: 1-800-CAL-SPAS Fax: 1-909-629-3890 1 Delivery and Set- 2009 Spa Wraps LTR20091032, Rev. A Delivery and Set-Up Planning the Best Location for Your Spa Wrap Most cities and counties require permits for exterior construction and electrical circuits. In addition, some communities have codes requiring residential barriers such as fencing and/or self-closing gates on property to prevent unsupervised access to the property by children under the age of five. Your dealer can provide information on which permits may be required and how to obtain them prior to the delivery of your equipment. The following are some of the things that you will need to consider when determining the placement of your new spa wrap. Consider How You Will Use Your Spa Wrap How you intend to use your spa wrap will help you determine where you should position it. For example, will you use your spa wrap for recreational purposes? If your spa wrap is mainly used for family functions, be sure to leave plenty of room around it for activity. Consider Your Privacy In a cold weather climate, bare trees won’t provide much privacy. Think of your spa wraps surroundings during all seasons to determine your best privacy options. Consider the view of your neighbors as well, when you plan the location of your spa wrap. Provide A View With Your Spa Wrap Think about the direction you will be facing when sitting in your spa wrap. Do you have a special landscaped area in your yard that you find enjoyable? Perhaps there is an area that catches a soothing breeze during the day and lovely sunset in the evening. Consider these things when you plan your location. Preparing a Good Foundation Your spa wrap needs a solid and level foundation. The area that it sits on must be able to support the weight of the spa wrap and the occupants who use it. If the foundation is inadequate, it may shift or settle after the spa wrap is in place, causing stress that could DAMAGE YOUR SPA WRAP. Place the spa wrap on an elevated foundation (preferably a 3” concrete slab). Be sure that the concrete slab is at least 12” wider than the outside dimension on the spa wrap. If you are installing a spa on an elevated wood • deck or other structure, we strongly recommend that you consult a structural engineer or contractor to ensure the structure will support the weight of 150 Lbs./ sq. ft. It is strongly recommended that a qualified, • licensed contractor prepare the foundation for your spa. Size Specifications Model Length Width Height SW-100 129” 159” 96” SW-200 133” 152” 60” SW-300 122” 149” 70” SW-400 122” 133” 60” SW-500 146” 140” 83” NOTE: For all spa wraps, regardless of model, it is recommended that the foundation extend beyond the dimension of the spa wrap. For example, if the spa wrap you purchased is 12’x12’, you will want your foundation to be 14’x14’. The reason for this is because it will be easier to maintain the area around the spa wrap (mowing the lawn, edging, etc.) without damaging or scarring the spa wrap. Also, in doing this, you will eliminate any potential problems, foundation- wise, in the future. 2 Spa Wrap Assembly 2009 Spa Wraps LTR20091032, Rev. A Spa Wrap Assembly The following will tell you how to assemble your spa wrap. If you have any questions, problems with material and/or parts, please contact your local retailer. NOTE: It is strongly advised that you have a licensed professional install the foundation for your new spa wrap. It is imperative that the foundation is level, as any damage that occurs due to an uneven foundation is not covered by the war...