Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
The 2004 Aruba Spa includes many features, which are designed to ensure that your spa is dependable and simple to operate. This manual will guide you through the set-up, installation and startup of your new spa. It will explain how to operate and care for your spa. We believe reading this entire owner’s manual is the simplest HAZARD Denotes risk of personal injury. WARNING Denotes a circumstance that could cause personal injury or a circumstance where damage to the spa’s surface, structure or equipment could occur. IMPORTANT Denotes extremely important information. way to ensure the full enjoyment of your new Aruba Spa. It is most important that you read and follow the safety instructions included in this manual. You should become familiar with all of the safety guidelines listed in this manual and make sure you follow them while using your spa. At Aruba what we know how to do best is build spas. We have learned that quality through simplicity is the best way to build a spa. We believe that knowing how your spa is built will make installing and operating it easier, so the first part of this manual explains how your spa is built. Please take the time to read this section of your owner’s manual. It is important that you keep this manual for reference purposes. We have tried to make sure this manual includes all the information you will need about your spa. If you have any further questions or need additional information please call one of our customer service repre-sentatives at 1-800-609-2227. We are certain that you will find owning an Aruba Spa as relaxing as using it. The highlighted terms are used throughout this manual to indicate facts that are particularly important for your safety, and for maintaining your spa in good working order. HOW HOWHOW YOUR ARUBA YOUR ARUBAYOUR ARUBA SP SPSPA AA IS BUIL IS BUILIS BUILT TT At Aruba, building spas is our passion. We believe that quality through simplicity is the best way to build a spa. Over the years we have refined our spa construction process to achieve the best results. We are proud of the results that we have achieved using the methods described below and hope that knowing how your spa is made will make installing and operating it easier. The building process starts with the shell of the spa. At Aruba Spas we use the thickest acrylic sheet available. Using a thicker acrylic sheet is important because the spa shell is formed by placing a heated acrylic sheet over a vacuum-former, which molds it into the shape of the spa. As the acrylic sheet is formed it stretches and thins. Using a thicker acrylic sheet ensures a stronger and more durable surface. Fiberglass backing is then applied to provide structural support for the acrylic shell. A triple bond system is used to ensure a complete bond is formed between the acrylic spa shell and the fiberglass structural support. A unique type of resin is applied as a skin coat to the outside surface of the spa shell. This skin coat is then backed by an additional layer of fiberglass reinforced resin. The skin coat forms a chemical bond between the acrylic spa shell and the fiberglass structural support. This triple bond system ensures the long lasting integrity of both the spa shell and spa surface. After fiberglassing, the holes for the jets are precision drilled through the spa shell. The rough surface of the fiberglass backing around the holes is then machined and smoothed. We take this extra step in manufacturing to ensure the jets seat against a smooth surface for a tight fit and seal. The plumbing system is then installed and lines are attached to each of the jets. A manifold is installed at each junction between the main plumbing line and the lines leading to the jets. Running a short line from the manifold directly beneath the jets provides the best water pressure and allows the jets to operate at their full capacity. Once the spa is plumbed it is water tested as part of our quality inspection process to ensure that there are no leaks. The spa shell is then lowered into the framed cabinet or “spa skirt”. At Aruba Spas we use this innovative process to ensure the structural integrity of our spas. Wooden supports are then custom fitted by hand to the areas underneath the seats and stairs to provide additional strength to these areas. This process recognizes that every spa is not identical and ensures individual inspection and custom fitting of each spa. The spa shell is then insulated with 2 LB closed cell foam. As Aruba Spas are made in Canada we know Canadian weather conditions. With this in mind we use enough insulation to get the maximum obtainable R factor from our insulating foam. The use of closed cell foam ensures that water cannot be absorbed into the insulation. The insulation also locks all supports into place and secures the spa to the spa frame. The electronic operating system, which controls the heating, filtration and lighting systems is then installed and pre-tested in our factory. We have selected...