Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
When power is restored, your aerogarden will go back to the off- on cycle you have set. 5 Simple Steps... In order to make this as simple as possible, you only need to set the time you want your AeroGarden lights to go off (Off Time) and your built-in light timer automatically sets the On Time...nothing more for you to do. Do the following to set the time you want your lights to go off: Decide what time you want the lights to go OFF. AT THAT TIME check that lights are on. If they are off, quickly press “Lights” button and immediately release. (Lights must be on in order to reset timer.) With lights on, press and hold “Lights” button until white light next to the plant type you selected starts blinking – about 5 seconds. Release the button. When blinking stops (about 9 seconds), the lights will go off and your lights are now set to go off at this time every day. You can reset your timer as often as you want. 12345Lights Button Blinking Light (if you selected Salad Greens) Personalize Your Light Timer (continued) Personalize Your Light Timer (continued) The “24-Hour Light” setting allows you to override the built-in light timer and keep lights on and pump running 24 hours a day. You can also customize the amount of light plants receive by manually turning lights on and off using the “Lights” button, or setting automatic on/off times, using a standard light timer.* Use the “24-Hour Light” setting when growing plants that thrive with continual light and moisture, such as leafy greens and some herbs. For the more experienced gardener, the “24-Hour Light” setting provides added flexibility when planting a custom garden. You are no longer limited to the pre- programmed light schedules associated with each plant type (such as Tomatoes/Peppers, Salad Greens, etc.). note: “24-Hour light” setting is not recommended for Flower or Vegetable plants – they require a daily dark period to produce flowers. Accessing the “24-Hour Light” Setting • Press and release “Select” until the white light next to “24-Hour Light” is illuminated. • To exit “24-Hour Light” setting, simply push the “Select” button. * not included. if you use a light timer to turn the lights on and off, the nutrient timer and pump will stop whenever the lights are oFF. Both will start up again when the lights turn back on. the nutrient timer does not record the time elapsed when lights are off. to ensure that plants are fed every 2 weeks, we rec- ommend keeping track of your feeding schedule on a calendar. AeroGarden Deluxe “24-Hour Light” Setting Select 24-Hour Light once your aerogarden Deluxe is set on the “24-Hour light” setting, lights and pump will remain on 24 hours a day. to shorten the amount of time lights are on, quickly press and re- lease “lights” button, and lights will turn off. lights will automatically come back on within 12 hours – or, you can press and release “lights” button again, to turn lights back on. Use trellis system (optional) Use trellis system (optional) trellis Coil lamp Hood Bracket 1Clip Trellis Coil on Bracket. As your plants begin to produce fruit, you may find they are starting to tip over or even break due to the additional weight on branches. When this occurs, support plants and bring them back to the upright position by using your Trellis System*. *trellis Brackets must be attached to the lamp Hood in order to use the trellis system (see Bracket attachment instructions on page 2, step 1C). 2Pull down Trellis Coil. 4Gently push up on supported branch until it is at desired height. 3Wrap Strap around branch that needs support and snap closed. trellis Coil as a safety precaution, unplug aerogarden furnishing before performing this task. Be sure Grow Bulbs are cool to the touch before attaching or adjusting Trellis Coil. Basic Reminders About Your AeroGarden Basic Reminders About Your AeroGarden AeroGarden Deluxe Control Panel • Water Low When light blinks add water up to “Fill To Here.” • Add Nutrient (Feed garden - Basic Feeding) When “Add Nutrient” and “Water Low” lights start blinking (every 2 weeks), add 2 nutrient tablets* and fill the Bowl with water up to “Fill to Here.” Press and release “Reset” button to restart nutrient timer and turn off blinking lights. *see tending & Harvesting guide for plant-specific nutrient information. • Replace Grow Bulbs* When light blinks (after 6 months of use), it is time to replace Deluxe Grow Bulbs. Replacement bulbs can be ordered at or from your retailer. After replacing Deluxe Grow Bulbs, press “Reset” button to restart grow bulb timer and turn off flashing light. note: if you store your aerogarden Deluxe between uses, grow bulb timer automatically stops when aerogarden Deluxe is unplugged. *see complete replacement instructions on next page. • Lights On/Off Use to occasionally override built-in light timer. Once pushed, lights will stay off/on until the next time built-in light timer is set to go on/ off. This will not affect the timing of your light c...
Эта инструкция также подходит к моделям:Прочие аксессуары для дома - AeroGarden Deluxe 100733-WHT (1.15 mb)