Войти:
Оценок - 3, средний балл: 3.3 ( )

Инструкция по эксплуатации AeroGarden, модель AeroGarden 100710-BSS

Производитель: AeroGarden
Размер: 1005.12 kb
Название файла: 45cb8747-248b-4b56-aee7-aae58df6f0bf.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Near: A standard electrical outlet, per local regulations Under: A space that allows 22” (56cm) clearance for the full height of raised lamp On: A sturdy, water- tolerant surface (Metal surfaces may cause noise due to vibration) In: A 60-75°F (16-24°C) environment (optimal) Place Your Garden H 68°F/20°C 5 Plant Your Garden B Insert seed Pods into grow surface openings. Check to see that… • Seed Pods are in the same position on Grow Surface as they were in Seed Kit Tray. • Seed Pod Labels are facing forward. • Seed Pods are pressed firmly in place. Seed Kit Tray Seed Pod Bio-Domes™ Nutrients Grow Surface Add Water Using a Spouted Container A Lift View door Fill to “Fill to Here” (located inside Bowl) 2 Planting Your Garden When additional water is needed, “Water Level Low” light on Control Panel will blink. Add water to raise level up to “Fill To Here” inside Bowl. It is okay to add water up to “Fill To Here” before “Water Level Low” light blinks. Use room temperature municipal tap, bottled or purified water. Do not use well or softened water. Amount of Water To Be Added: 3.5 quarts or... 3.2 liters 5 Plant Your Garden B Insert seed Pods into grow surface openings. Check to see that… • Seed Pods are in the same position on Grow Surface as they were in Seed Kit Tray. • Seed Pod Labels are facing forward. • Seed Pods are pressed firmly in place. Seed Kit Tray Seed Pod Bio-Domes™ Nutrients Grow Surface Add Water Using a Spouted Container A Lift View door Fill to “Fill to Here” (located inside Bowl) 2 Planting Your Garden When additional water is needed, “Water Level Low” light on Control Panel will blink. Add water to raise level up to “Fill To Here” inside Bowl. It is okay to add water up to “Fill To Here” before “Water Level Low” light blinks. Use room temperature municipal tap, bottled or purified water. Do not use well or softened water. Amount of Water To Be Added: 3.5 quarts or... 3.2 liters Add Starting Nutrient Tablets and Record Planting Date D note: do not remove Bio-Domes until seeds have sprouted. neVer reMoVe SEED POD LABELS. Place a Bio-Dome on each Seed Pod. Press Bio-Dome down until its rim almost touches Grow Surface. Place Bio-Domes™ on Seed Pods C Bio-Dome Add 2 tablets from “Starting Nutrients” bag directly into Bowl. Record Planting Date Record the date your Seed Kit was planted on front cover of the Tending & Harvesting Guide. See "Add Nutrient" (Feed garden - Basic Feeding) on page 11 of this guide for additional feeding instructions. Add Starting Nutrient Tablets and Record Planting Date D note: do not remove Bio-Domes until seeds have sprouted. neVer reMoVe SEED POD LABELS. Place a Bio-Dome on each Seed Pod. Press Bio-Dome down until its rim almost touches Grow Surface. Place Bio-Domes™ on Seed Pods C Bio-Dome Add 2 tablets from “Starting Nutrients” bag directly into Bowl. Record Planting Date Record the date your Seed Kit was planted on front cover of the Tending & Harvesting Guide. See "Add Nutrient" (Feed garden - Basic Feeding) on page 11 of this guide for additional feeding instructions. 3 Starting Your Garden 3 Starting Your Garden Plug Cord into Electrical Outlet A A green light next to “Germination” and a white light on Control Panel will illuminate. Grow Bulbs will come on. Look under Lamp Hood to check that both bulbs are lit. If not, check to see if: • Grow Bulbs are properly inserted in Lamp Hood (page 2, step 1C). • Lamp Cord is plugged into Lamp Hood (page 2, step 1D). • You are getting power through the electrical outlet. When Pump starts* it may make a gurgling noise for a moment. Lift View Door. You should see water dripping from the bottom of Seed Pods into the Bowl. If not, check to see if: • Lamp Arm is fully inserted into Base (page 2, step 1B). • Bowl is firmly seated in Base (page 3, step 1F). *Pump may take up to twelve hours to start. What will happen... 123view Door Plug in note: You will hear water flowing until plant roots have grown to surface level of water (a few weeks). Keeping water level in Bowl up to “Fill To Here” will help reduce the sound of dripping water. Your Light Timer C • Your lights will stay on for about 16 hours and will shut off for about 8 hours.* • Your lights will come on every day at the time you plugged in your AeroGarden PRO100.* *except when using “24-Hour light” setting, which sets lights to be on for 24 hours. Select SettingB Press the SELECT button until you reach the type of plant you are growing (Tomatoes/Peppers, Salad Greens, etc.). Your Light Timer is Set To Start Growing Your Plants...starting now! If You Would Like to Change the Time of Day Your Lights Will Go Off... See “Personalize Your Light Timer” on page 9. 1 2 note: depending on the plant type selected, your aerogarden Pro100 pump will automatically turn on and off at pre-programmed intervals. Pump controls the flow of water through Seed Pods to optimize plant growth. Your Light Timer C • Your lights will stay on for about 16 hours and will shut off for about 8 hours...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории