|
Фрагмент инструкции
It should be operated on a separate electrical circuit from other appliances. Operating Instructions Before First Use 1. Carefully unpack the Can Opener. 2. Make sure the Can Opener is unplugged. Wipe with a soft, clean cloth or sponge. Never immerse the Can Opener in water or any other liquid. 3. Carefully insert the Operating Lever into the Can Opener. Hold the Can Opener facing you with the Lever in the lifted position and slide the Pivot into the Pivot Hole. Push the Lever towards the Soft-Touch Handle (see Figures 2 and 3). Fold the Magnet up for storage. 4. Plug Can Opener into electrical outlet and press down on the Operating Lever to make sure it is operating properly. CAUTION: Risk of personal injury. Keep hands from beneath the Operating Lever where the Geared Wheel and Cutting Blade are located. This Can Opener is designed for food contact. DO NOT use to open cans with non-food substances in them such as paint, aerosols, etc. 2. Hand Held Can Opener Use and Care Guide Getting to know your Toastmaster Can Opener Getting to know your Toastmaster Can Opener 2. 3. 5. 6. 7. 8. 1. Soft Touch Handle 2. Pivot Hole 5. Cutting Blade 3. Piercing Lever 6. Pivot 7. Guide Bar 8. Geared Wheel 1. 4. FIGURE 1 4. Magnet FIGURE 2 3. FIGURE 3 FIGURE 3 Using The Can Opener See Operating Instructions Before First Use for assembly instructions. 1. Remove all packaging materials before using. 2. Place the Can Opener on a level surface and plug into 120V~60 Hz electrical outlet. 3. Fold the Magnet down in the operating position as shown in Figure 2. 4. Place can level. 5. Raising Piercing Lever, place can under Guide Bar and against Geared Wheel, see Figure 4. 6. Press down on Lever to pierce lid of can. Release the Lever and can will stop automatically when opened. 7. Grasp the can, then raise the Lever up from the can. 8. Slide the lid away from the Magnet. Use caution to avoid injury from sharp edge of lid. CAUTION: Always unplug Can Opener from electrical outlet when not in use and before cleaning. Never immerse Can Opener, cord or plug in water or any other liquid. CAUTION: Do not use scouring pads or any type of harsh cleansers that may damage the surfaces or dull the Cutting Blade. 4. Hand Held Can Opener Use and Care Guide User Maintenance Instructions User Maintenance Instructions r serviceable parts. Do not try to repair it yourself. Refer it to a qualified appliance repair technician if servicing is needed. Care And Cleaning 1. Unplug the unit from electrical outlet. The Can Opener should be kept clean to avoid food contamination. 2. To remove Lever, hold the Can Opener facing you. Lift the Lever away from the Soft-Touch Handle (as shown in Figure 1) and pull the Lever away from the Can Opener. 3. Wash Lever in warm, soapy water and wipe the outside surfaces of the unit with a damp cloth. 4. To replace the Lever, hold the Can Opener facing you with the Lever in the lifted position and slide the Pivot into the Pivot Hole. Push the Lever towards the Soft-Touch Handle (see ...
Эта инструкция также подходит к моделям:Прочие аксессуары для дома - 2244, 2244B, 2244 (1.31 mb)
Прочие аксессуары для дома - 2244 (1.31 mb)