Оценок - 2, средний балл: 3.5 ( )

Производитель: AeroGarden Размер: 988.55 kb Название файла: Язык инструкции:

This will not affect the timing of your light cycle, and occasional use of this feature will not harm your plants. • Select The number of hours the lights are on and off depends on which plant type is selected. Use “Select” button to reach “24-hour Light” setting (see page 9). 11 Basic Reminders About Your AeroGarden (continued) Basic Reminders About Your AeroGarden (continued) Add Nutrients Replace Bulbs When “Replace Bulbs” light on control Panel begins blinking after 6 months of use… • Unplug AeroGarden 6 Elite+. • Remove old Grow Bulbs and carefully discard.* IMPorTAnT: To avoid burning, be sure Grow Bulbs are cool before handling. • Insert new Grow Bulbs into Lamp Hood. • Plug in AeroGarden 6 Elite+ and press and release “Reset” button to restart grow bulb timer. Early Grow Bulb Replacement If you replace Grow Bulbs before “Replace Bulbs” light illuminates, be sure to restart grow bulb timer as follows: • Press and hold “Lights” button until light next to your selected plant type starts blinking – about 5 seconds. • Release “Lights” button. The plant type selected light will continue to blink for about 9 seconds. While plant light is still blinking… • Quickly press and release “Reset” button. “Replace Bulbs” light will blink once and the plant selected light will stop blinking. Replace Grow Bulbs – order bulbs at *Check with local recycling authorities for light bulb recycling availability in your area. Raise lamp Hood (lights) As plants grow to 1-2” from lights, raise Lamp Arm one notch at a time (each of the three Lamp Arm sections has three notches). Be sure Lamp Arm is at the lowest setting when you start your AeroGarden 6 Elite+. Unplug AeroGarden 6 Elite+ and remove Bowl from Base. Raise Lamp Arm/Lamp Hood: • Hold Lamp Arm where it connects to Lamp Hood with one hand. With other hand, push in Locking Lever. • Release Locking Lever while pulling up on Lamp Arm. • Locking Lever will automatically click into next notch in the Lamp Arm section. Replace Bowl on Base and plug in AeroGarden 6 Elite+. Push locking lever in Push locking lever in 123Push locking lever in Push locking lever in 12 Basic Reminders About Your AeroGarden (continued) (optional) Trellis System Basic Reminders About Your AeroGarden (continued) (optional) Trellis System About the Trellis System (not included) Your AeroGarden 6 Elite+ has the option of connecting a Trellis System to its Lamp Hood. The Trellis System allows you to easily support heavy, fruit-filled branches on full-size plants such as tomatoes, peppers and cucumbers. If you are interested in purchasing an AeroGarden Trellis System, you may do so at or from your retailer. Trellis System installation If your AeroGarden 6 Elite+ is already assembled, you will need to remove the lamp Hood from lamp Arm, and remove Grow Bulbs from the lamp Hood before starting. It is best to do this when Garden lights are off. Attach Trellis Brackets to lamp Hood Unplug AeroGarden 6 Elite+ and carefully remove Lamp Hood from Lamp Arm. Turn Lamp Hood over and remove Grow Bulbs. (Be sure bulbs are cool before handling.) Insert Grow Bulbs into Lamp Hood. Replace Lamp Hood on Lamp Arm and plug in AeroGarden 6 Elite+. Hand tighten pre-mounted screws with phillips head screwdriver. Do not over-tighten. Use Trellis System 123451Clip Trellis Coil on Bracket. 4Gently push up on supported branch until it is at desired height. 3Wrap Strap around branch that needs support and snap closed. As a safety precaution, unplug AeroGarden furnishing before performing this task. Be sure Grow Bulbs are cool to the touch before attaching or adjusting Trellis Coil. 2Pull down Trellis Coil. lamp Hood Bracket Trellis coil 13 Prepare For Your Next Garden Prepare For Your Next Garden cleaning Instructions for your AeroGarden Use only water and mild soap when cleaning your AeroGarden (except when Sanitizing - Step 6). Do not use abrasive cleaners or run through the dishwasher. When your garden has completed its growing cycle… Rinse Bowl and Grow Surface with tap water. Repeat. Towel dry Bowl and Grow Surface before putting them back together and setting them on Base. If Grow Bulbs have been in use more than 6 months, they should be replaced at this time (see page 12). Your AeroGarden is now ready for replanting. Unplug AeroGarden. Carefully remove Bowl and Grow Surface from Base and bring to a sink. Set Base and Lamp Hood aside. NEVER SUBMERSE BASE AND CONTROL PANEL IN WATER. Remove Grow Surface from Bowl and place on a counter near a sink. Empty contents of Bowl in sink. Remove Seed Pods and plants from Grow Surface. • Pull Seed Pods out of Grow Surface openings. • Throw away Seed Pods and plant debris (plant growth and roots). If you compost, plant debris can be composted. Sanitize AeroGarden. • Fill Bowl . full with water. • Add . cup (59ml) of chlorine bleach. • Let sit for 2 minutes. • Using sanitizing water, wipe Grow Surface and Bowl with soft cloth or sponge....

Скачать инструкцию

Чтобы скачать, введите 2 цифры: