|
Фрагмент инструкции
• Seed Pod Labels are facing forward. • Seed Pods are pressed firmly in place. Grow Surface Use room temperature municipal tap, bottled or purified water. Do not use well or softened water. Amount of Water To Be Added: 3.5 quarts or... 3.2 liters 5 Add Water Using a Spouted Container A 2 Planting Your Garden Plant Your Garden B Lift View door Fill to “Fill To Here” (located inside the Bowl) When additional water is needed, “Water Level Low” light on Control Panel will blink. Add water to raise level up to “Fill To Here” inside Bowl. It is okay to add water up to “Fill To Here” before “Water Level Low” light blinks. Seed Kit Tray Seed Pod Bio-Domes™ Nutrients Insert Seed Pods into Grow Surface openings. Check to see that… • Seed Pods are in the same position in Grow Surface as they were in Seed Kit Tray. • Seed Pod Labels are facing forward. • Seed Pods are pressed firmly in place. Grow Surface Use room temperature municipal tap, bottled or purified water. Do not use well or softened water. Amount of Water To Be Added: 3.5 quarts or... 3.2 liters Place Bio-Domes on Seed Pods C Add Starting Nutrient Tablets and Record Planting Date D Place a Bio-Dome on each Seed Pod. Press Bio-Dome down until its rim almost touches Grow Surface. Bio-Dome Record Planting Date Record the date you planted your AeroGarden on the front cover of the Guide that came with your Seed/Plant Kit. Add 2 tablets from “Starting Nutrients” bag directly into Bowl. See "Add Nutrients" (Feed Garden - Basic Feeding) on page 10 of this guide for additional feeding instructions. note: do not remove Bio-domes until seeds have sprouted. neVer reMoVe SEED POD LABELS. Place Bio-Domes on Seed Pods C Add Starting Nutrient Tablets and Record Planting Date D Place a Bio-Dome on each Seed Pod. Press Bio-Dome down until its rim almost touches Grow Surface. Bio-Dome Record Planting Date Record the date you planted your AeroGarden on the front cover of the Guide that came with your Seed/Plant Kit. Add 2 tablets from “Starting Nutrients” bag directly into Bowl. See "Add Nutrients" (Feed Garden - Basic Feeding) on page 10 of this guide for additional feeding instructions. note: do not remove Bio-domes until seeds have sprouted. neVer reMoVe SEED POD LABELS. 3 Starting Your Garden 3 Starting Your Garden A green light on the Smart Garden Control Panel will light up. Grow Bulbs will come on. Look under Lamp Hood to see if both bulbs are lit. If not, check to see if: • Grow Bulbs are properly inserted in Lamp Hood (page 2, step 1C). • Lamp Cord is plugged into Lamp Hood (page 2, step 1D). • You are getting power through the electrical outlet. When Pump starts* it may make a gurgling noise for a moment. Lift View Door. You should see water dripping from the bottom of Seed Pods into the Bowl. If not, check to see if: • Lamp Arm is fully inserted into Base (page 2, step 1B). • Bowl is firmly seated on Base (page 3, step 1F). What will happen... . . . view Door Plug in Plug Cord into Electrical Outlet A *Pu...
Эта инструкция также подходит к моделям:Прочие аксессуары для дома - AeroGarden 100629 (924.55 kb)
Прочие аксессуары для дома - AeroGarden 100710-WHT (924.55 kb)
Прочие аксессуары для дома - AeroGarden 200629 (924.55 kb)
Прочие аксессуары для дома - AeroGarden 200710-BKG (924.55 kb)