Оценок - 1, средний балл: 3 ( )

Производитель: Alps Electric Размер: 1.84 mb Название файла: Язык инструкции:

To clean the cover you can use soap and water or any type of vinyl cleaner. Do not stand or sit on the cover. Be sure not to puncture the inside or outside of the cover. This will cause the cover to absorb water and become extremely heavy. CABINET CARE Your cabinet is completely synthetic and requires very little maintenance. You can use a plastic cleaner/protector or mild soap as needed. SPA MAINTENANCE page 10 ALPS-Spas 4400 Steve Reynolds Blvd. Norcross, Georgia 30093 770-381-2022 Fax: 770-925-1900 In the event ALPS’s hot tub is not working the way it should, please first review all the installation and operating instructions in this manual and check the message on the panel display. If you are still not satisfied it is working properly, please follow the appropriate troubleshooting instructions. Problem: Motor is running, but no water is coming out of the jets. Solution: This is a common problem that often occurs when the hot tub has just been filled with water. To solve this issue, take a water hose and spray water into the hole located inside the skimmer. (See Figure T1). This will supply the pumps with water and prime them. Figure T1 Spa Tripping Breaker? - Check wiring connection - Check if any moisture is inside cabinet especially in or around Spa Pack. TROUBLESHOOTING PROCEDURES WARNING DO NOT PUT YOUR HAND INSIDE THE SPA PACK ELECTRIC SHOCK MAY OCCUR. ! Best selling cabinet cover in the world!Spa Cover Lift Features: • 2 Hydraulic pistons for easy one-fi nger lifting • Automatic locking pistons prevent cover from falling • Frames are galvanized and powder coated for long life Benefits: • One-person operation to remove cover • Protects cover from abrasive concrete and wood deck • Prolongs life of cover - no more ripped or torn covers Spa Cover not included. page 11 Log onto for more trouble shooting and online help. ALPS-Spas 4400 Steve Reynolds Blvd. Norcross, Georgia 30093 770-381-2022 Fax: 770-925-1900 In the event ALPS’s hot tub is not working the way it should, please first review all the installation and operating instructions in this manual and check the message on the panel display. If you are still not satisfied it is working properly, please follow the appropriate troubleshooting instructions. Problem: Motor is running, but no water is coming out of the jets. Solution: This is a common problem that often occurs when the hot tub has just been filled with water. To solve this issue, take a water hose and spray water into the hole located inside the skimmer. (See Figure T1). This will supply the pumps with water and prime them. Figure T1 Spa Tripping Breaker? - Check wiring connection - Check if any moisture is inside cabinet especially in or around Spa Pack. TROUBLESHOOTING PROCEDURES WARNING DO NOT PUT YOUR HAND INSIDE THE SPA PACK ELECTRIC SHOCK MAY OCCUR. ! Best selling cabinet cover in the world!Spa Cover Lift Features: • 2 Hydraulic pistons for easy one-fi nger lifting • Automatic locking pistons prevent cover from falling • Frames are galvanized and powder coated for long life Benefits: • One-person operation to remove cover • Protects cover from abrasive concrete and wood deck • Prolongs life of cover - no more ripped or torn covers Spa Cover not included. page 11 Log onto for more trouble shooting and online help. PS-Spas 4400 Steve Reynolds Blvd. Nor oss, Georgia 300 770-381-2022 Fax: 770-925-1900 page 12 PS-Spas 4400 Steve Reynolds Blvd. Nor oss, Georgia 300 770-381-2022 Fax: 770-925-1900 page 12 WARRANTY INFORMATION WARRANTY INFORMATION Limited Warranty THIS LIMITED WARRANTY IS EXTENDED TO THE ORIGINAL PURCHASER OF A TETON XLS, CIARA XLS, K2 XLS, Tigra XLS OR SWIM SPA MANUFACTURED BY ALPS SPAS AFTER DECEMBER 1 2005, AND INSTALLED IN NORTH AMERICA ALPS SPAS are warranted against defects in the spa shell due to defects in workmanship and/or materials for Lifetime from the original date of sale ALPS SPAS are warranted against blistering, cracking, or delaminating of the interior surface of the spa due to defects in workmanship and/or materials for (5) five years from the original date of sale ALPS SPAS plumbing components are warranted against water loss due to defects in workmanship and/or materials for (5) five years from the original date of sale. One year labor. ALPS SPAS electrical equipment components (pumps, heater, and control system) are warranted against malfunction due to defects in workmanship and/or materials for (3) three years from original date of sale and (2) years pro-rated at 50% of current retail price. One year labor. WARRANTIES FOR OTHER COMPONENTS. Light bulbs, fuses, headrests, filters, and cabinet finish are warranted to be free of defects in workmanship and/or materials at the time of delivery only. All other factory-installed components including but not limited to the cabinet, jets, diverter valves, and ozonator are warranted against malfunction du...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: