Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
NOTE: For complete feature instructions, please refer to your user’s manual. 96-006299-020-100 issue 0 STEP 1 Connect power to telephone base and chargers then connect telephone line to telephone base Plug the connector into the power jack at the bottom of the telephone base and chargers then plug the power adapter into an electrical outlet not controlled by a wall switch. Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone base. Then plug the other end of the cord into the modular wall telephone outlet. • • STEP 2 Install the battery • Align the two holes in the plug with the socket pins matching the color-coded label in the battery compartment of the handset, then snap the plug securely into place. • Place the battery in the compartment with the wires in the upper right corner. • Position the battery compartment cover and slide it towards the unit until it clicks into place. • For optimal performance, we recommend that you charge the handset for 16 hours. Note that the new battery may have enough charge for some calls. STEP 3 Make, receive, and end calls Make a call • Press /FLASH or /SPEAKER to ensure there is a dial tone, then dial the telephone number. -ORFor predialing: • Dial the number (press MUTE/REMOVE or OFF/CLEAR to backspace, or press and hold REDIAL/PAUSE to insert a pause). Press /FLASH or /SPEAKER if you want to use the speakerphone function. Receive a call • Press /FLASH or /SPEAKER or any dialing keys (0-9, #, *) if you want to use the speakerphone function. End a call • Press OFF/CLEAR, or put the handset in the telephone base or charger. • STEP 4 Set the answering system clock Press CLOCK to listen to the current clock setting. Press CLOCK again to change the settings. Press /SKIP or /REPEAT to change the year, hour, minute, or date. When the correct setting is announced, press CLOCK to advance to the next setting. ••• STEP 5 Turn the answering system on and off The answering system must be turned on to function. If the answering system is turned off, the telephone base light will be off. To turn on/off the answering system: • Press ANS ON/OFF to choose between on and off. STEP 6 Record outgoing announcement (optional) The telephone is pre-programmed with the announcement “Hello, please leave a message after the tone. ” To replace the default announcement: • Press ANNC and the system announces “Announcement, press PLAY or press RECORD.” • Press RECORD to record, and the system announces “Record after the tone. Press STOP when you are done.” • After the tone, speak towards the microphone at the front right of the telephone base from about nine inches away. • Press /PLAY/STOP when finished and the answering system will automatically playback the newly recorded announcement. STEP 7 Charge the battery The battery may have enough charge for a short call. For best performance, charge the battery for at least 16 hours. To charge the handset, place it in the telephone base or charger. Th...
Эта инструкция также подходит к моделям:Прочие аксессуары для дома - 6767 (1.01 mb)
Прочие аксессуары для дома - 6779 (1.01 mb)
Прочие аксессуары для дома - 6787 (1.01 mb)
Прочие аксессуары для дома - 6789 (1.01 mb)