Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions: Read all instructions thoroughly before activating the appliance and retain them for future reference. Ensure that the power source to be used is the same as the voltage requirement of the product. Always switch the appliance off, then switch off at the power outlet, and then unplug when not in use. Allow all parts to cool before cleaning. DO NOT IMMERSE THE APPLIANCE, POWER CORD, KETTLE BASE OR PLUG IN WATER OR ANY OTHER LIQUID Do not touch hot surfaces. Use handle. This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure they do not play with the appliance. Do not leave the appliance unattended when in use. If the kettle is over filled, boiling water may be ejected. Do not let the cord hang over the edge of a table or counter, touch hot surfaces or become knotted. Do not place the appliance on or near hot gas or electric burner, or where it could touch a heated oven. This appliance is suitable for domestic use only. Do not use this appliance for anything other than its intended use. Do not use outdoors. The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice. Regularly inspect the supply cord, plug and actual appliance for any damage. If found damaged in any way, immediately cease use of the appliance and return the entire appliance to the nearest authorised Kambrook Service Centre for examination, replacement or repair. Features of your Kambrook Stainless Steel Cordless Kettle 148695723 1. 2L Capacity 2. 2400 watt concealed element – reduces scale build up and prolongs element life 3. 360° Multi-directional base 4. Removable stainless steel filter 5. Cool-touch handle 6. Safety auto cut-off and boil dry protection 7. On/Off switch with Power “ON” light 8. Removable lid for easy cleaning 9. Cord storage Using Your Kambrook Stainless Steel Cordless Kettle Before first using your Kambrook Cordless Stainless Steel Kettle, we recommend that the kettle is filled to the maximum level, boiled and water discarded.Your kettle will only operate when positioned on the multi-directional base with the ON/OFF switch in the “ON” position.The kettle will automatically switch “OFF” when the water is boiled. To fill the kettle, remove it from the multidirectional base and open the lid. Fill with the desired amount of water. Never fill the kettle above the ‘MAX’ mark, which is indicated inside the kettle.Too little water will result in the kettle switching “OFF” before the water has boiled. Note: Do not fill above the MAX mark as boiling water may splash out from the kettle.The max line is shown on the red indicator inside the kettle. Ensure the lid is firmly in place before placing the kettle on the multi-directional base. Position the kettle on the multi-directional base. Plug the cord into a 230 / 240 volt power outlet and switch the outlet on. Flick the ON/OFF switch downwards – the Power “ON” light will illuminate. Once the water has boiled the kettle will automatically switch “OFF”. Lift the kettle from the multi-directional base and pour the water. Note:This kettle must only be used with the multidirectional base supplied. Use caution when pouring water from your kettle as boiling water will scald. CAUTION: • Do not operate the kettle on an inclined surface • Do not operate the kettle without water • Do not move the kettle while it is switched ‘on’ • Do not remove the lid while water is boiling • Do not use the kettle to heat or boil any liquid or foodstuff other than water • Ensure the kettle is switched ‘off’ before it is removed from the base The kettle may be stored on the multidirectional base when not in use.The power should be switched off at the power outlet and then unplugged when not in use. This kettle is fitted with a safety device, which protects against overheating should your appliance be operated with insufficient water. If this occurs the kettle will stop heating and automatically switch “OFF”. Should this occur, switch off at the power outlet and unplug.Allow the kettle to cool down before refilling.The safety device will automatically reset when the kettle has cooled down. For additional safety your kettle is fitted with an additional thermal cut out. In the event of overheating, the kettle will automatically shut down to prevent further damage. Should this occur, take your kettle to an authorised Kambrook Service Centre. Maintaining Your Kambrook Stainless Steel Cordless Kettle Always switch appliance off, then switch off at the power outlet and then un...